Pulse energy, repetition rate, pulse width
PS-D-532355 nm UV pulsed laser
355 nmPS-D-532 is a 355 nm Pulsed laser. Used for glass marking, sapphire marking, ceramic cutting, semiconductor cutting. & 355-Air; M²: <1.2. Key specifications: output / average power 1~500 mW, pulse energy 1~500 nJ, repetition rate 0.1-1 MHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
PS-D-532
19 specification rows
| Wavelength | 355 nm |
|---|---|
| Output / average power | 1~500 mW |
| Pulse energy | 1~500 nJ |
| Repetition rate | 0.1-1 MHz |
| Pulse width | ~10 ps |
| Power stability | <3%, <2%, <1% |
| M² | <1.2 |
| Beam / notes | & 355-Air |
| Polarization ratio | >100:1 Vertical |
| Rep.rate | 100kHz-1MHz |
| Pulse duration (ps) | ~10 |
| Transverse mode | TEM00 |
| Beam Circularity (%) | >90 |
| Beam divergence, full angle (mrad) | <3 |
| Beam height from base plate (mm) | 90.5 |
| Warm-up time (minutes) | ≥30 |
| Cooling method | Air cooled |
| Operating temperature (℃) | 20-30 |
| Operating voltage（VDC） | 24V/20.9A |
| Expected lifetime（hours） | >10000 |
Applications
Uses named on this model’s datasheet.
- Glass marking
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Solar panelscoating
- Film scribing
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the PS-D-532 with nearby pulsed lasers across the wavelength range.
