Pulse energy, repetition rate, pulse width
PS-D-355355 nm UV high-power pulsed laser
355 nmPS-D-355 is a 355 nm Pulsed laser. Used for glass marking, sapphire marking, ceramic cutting, semiconductor cutting. Key specifications: output / average power 1~30 W, pulse energy 1~30 uJ, repetition rate 0.4-1 MHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
PS-D-355
19 specification rows
| Output / average power | 1~30 W |
|---|---|
| Pulse energy | 1~30 uJ |
| Repetition rate | 0.4-1 MHz |
| Pulse width | ~10 ps |
| Power stability (rms, 4 hours ± 3°C) | <2%, <1% |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <2 |
| M2 | <1.2 |
| Polarization ratio | >100:1 Horizontal (Vertical optional) |
| Warm-up time (minutes) | ≥30 |
| Cooling method | Water cooled |
| Operating temperature (℃) | 20-30 |
| Operating voltage (VDC) | 36V/40A |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 355±1 |
| Pulse duration (ps) | ~10 |
| Beam Circularity (%) | >90 |
| Beam diameter at the at the aperture (1/e2, mm) | ~2 |
| M² | <1.2 |
Applications
Uses named on this model’s datasheet.
- Glass marking
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Solar panel coating
- Film scribing
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the PS-D-355 with nearby pulsed lasers across the wavelength range.
