Power stability, linewidth, beam quality
MSL-W-588588 nm yellow CW laser
588 nmMSL-W-588 is a 588 nm CW laser. Used for dna sequencing, flow cytometry, cell sorting, optical instruments. Laser. Key specifications: output / average power 200-500 mW, operating mode CW, power stability (rms, 4 hours, ±3°c) <3%, <2%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MSL-W-588
24 specification rows
| Output / average power | 200-500 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3°C) | <3%, <2% |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Spectral line width (nm) | <0.00001 |
| Noise of amplitude (rms, 20Hz-20MHz) | <1%, <0.5% |
| M2 | <1.5 |
| Beam diameter at the aperture (1/e2, mm) | <3.0 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Warm-up time (minutes) | <20 |
| Pointing stability over temperature (urad/°C) | <8 |
| Cooled method (Water cooled) | WCH-580 |
| Operating temperature (°C) | 20-30 |
| Power supply (90-264VAC) | PSU-W-FDA |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 588±1 |
| Output power (mW) | 200-500 |
| Coherent length (m) | >50 |
| M² | <1.5 |
| Beam divergence, full angle (mrad) | <1.5 |
| Pointing stability (urad) (over 2 hours after warm-up and ±3°C) | <50 |
| Beam height from base plate (mm) | 58 |
Applications
Uses named on this model’s datasheet.
- DNA sequencing
- Flow cytometry
- Cell sorting
- Optical instruments
- Spectrum analysis
- Interference
- Measurement
- Holography
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related cw lasers
Compare the MSL-W-588 with nearby cw lasers across the wavelength range.
