SLM, narrow linewidth, coherence
MSL-S-532-Raman532 nm green narrow-linewidth single-frequency laser
532 nmMSL-S-532-Raman is a 532 nm Single-Frequency laser. Used for dna sequencing, flow cytometry, cell sorting, optical instruments. M²: <1.1. Key specifications: output / average power 1~150 mW, spectral linewidth <1 MHz, power stability <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MSL-S-532-Raman
24 specification rows
| Output / average power | 1~150 mW |
|---|---|
| Spectral linewidth | <1 MHz |
| Power stability | <0.5% |
| Optical noise | <0.2% |
| M² | <1.1 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Longitudinal mode | Single |
| Frequency shift (MHz) (over ±2°C and 8 hours) | <±200 (<0.07cm-1) |
| Beam diameter at the aperture (1/e2,mm) | <1.0 |
| Beam divergence, full angle (mrad) | <1.2 |
| Polarization ratio | >100:1, Horizontal (Vertical optional) |
| Pointing stability over temperature (µrad/°C) | <8 |
| Warm-up time (minutes) | <5 |
| Operating voltage (VDC) | 12V/3A |
| Operating temperature (°C) | 15-35 |
| Storage temperature (°C) | -10-50 |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±0.05 (air condition) |
| Wave number cut-off for raman spectrum (cm-1) | <5 |
| Spectral purity @±0.14nm (5cm-1) from the main peak | >60dB |
| Spectral purity @±1.4nm (50cm-1) from the main peak | >80dB |
| Noise of amplitude (rms, 20Hz-20MHz) | <0.2% |
| Pointing stability (µrad) (over 2 hours after warm-up and ±3°C) | <50 |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- DNA sequencing
- Flow cytometry
- Cell sorting
- Optical instruments
- Spectrum analysis
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related single-frequency lasers
Compare the MSL-S-532-Raman with nearby single-frequency lasers across the wavelength range.
