Pulse energy, repetition rate, pulse width
HPL-532-PA532 nm green Q-switched pulsed laser
532 nmHPL-532-PA is a 532 nm Pulsed laser. Used for marking, carving, measure, scientific research. Key specifications: operating mode Q-switched, output / average power 1~10 W, repetition rate 0.2 kHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
HPL-532-PA
20 specification rows
| Operating mode | Q-switched |
|---|---|
| Output / average power | 1~10 W |
| Repetition rate | 0.2 kHz |
| Pulse width | ~10 ns @200 Hz |
| Single pulse energy (mJ) | 1-50 |
| Power stability (rms, 4 hours±3℃) | <5%, <3% |
| Warm-up time(minutes) | <10 |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (220VAC) | PSU-HPL-PA*3 |
| Expected lifetime (hours) | >10000 |
| Pulse energy | 200 mJ |
| Pulse duration (ns) | ~10 |
| Average power (W) | 1-10 |
| Wavelength (nm) | 532±1 |
| Rep. rate | 200Hz |
| Peak power (MW) | 0.5-5 |
| Beam divergence, full angle (mrad) | <1 |
| Beam diameter at the aperture (1/e2,mm) | ~8 |
| Beam height from base plate (mm) | 71 |
Applications
Uses named on this model’s datasheet.
- Marking
- Carving
- Measure
- Scientific research
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the HPL-532-PA with nearby pulsed lasers across the wavelength range.
