Pulse energy, repetition rate, pulse width
FS-G-515A515 nm green high-power pulsed laser
515 nmFS-G-515A is a 515 nm Pulsed laser. Used for sapphire marking, ceramic cutting, semiconductor cutting, film scribing. <500fs @50kHz-1MHz. Key specifications: operating mode Pulsed, output / average power 1~20 W, rep. rate (khz) 50-1000. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FS-G-515A
22 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 1~20 W |
| Beam / notes | <500 fs @50 kHz-1 MHz |
| Rep. rate (kHz) | 50-1000 |
| Pulse duration (fs) | <500 |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| M2 | <1.3 |
| Polarization ratio | >100:1 Horizontal |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 515±5 |
| Average power (W) | 1-20 (20W@200kHz) |
| Single pulse energy (μJ) | 1-200 (200μJ @50kHz) |
| Peak power (MW) | 1-250 |
| M² | <1.3 |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | <3 |
| Beam height from base plate (mm) | 110 |
Applications
Uses named on this model’s datasheet.
- Sapphire marking
- Ceramic cutting
- Semiconductor cutting
- Film scribing
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the FS-G-515A with nearby pulsed lasers across the wavelength range.
