Pulse energy, repetition rate, pulse width
FS-F-515D515 nm green high-power pulsed laser
515 nmFS-F-515D is a 515 nm Pulsed laser. Used for optical microscope, photon imaging, physics experiment. <300fs @100kHz-1MHz. Key specifications: operating mode Pulsed, output / average power 20~40 W, rep. rate (khz) 100-1000. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FS-F-515D
23 specification rows
| Operating mode | Pulsed |
|---|---|
| Output / average power | 20~40 W |
| Beam / notes | <300 fs @100 kHz-1 MHz |
| Rep. rate (kHz) | 100-1000 |
| Pulse duration (fs) | <300 |
| Fiber | Femtosecond / pulsed / laser / at |
| Ave power stability (rms, 4 hours±3℃) | <2%, <1% |
| Warm-up time (minutes) | <10 |
| Transverse mode | TEM00 |
| M2 factor | <1.3 |
| Polarization ratio | >100:1 Horizontal |
| Cooled method | Water cooled |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | RAD1PS |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 515±5 |
| Average power (W) | 20-40 (40W@500kHz&1MHz) |
| Single pulse energy (uJ) | 20-80 (40uJ @1MHz, 80uJ @500kHz) |
| Peak power (MW) | 66.7-266MW (133MW@1MHz;266MW@500kHz) |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2,mm) | <3 |
| M² | <1.3 |
| Beam height from base plate (mm) | 118 |
Applications
Uses named on this model’s datasheet.
- Optical microscope
- Photon imaging
- Physics experiment
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related pulsed lasers
Compare the FS-F-515D with nearby pulsed lasers across the wavelength range.
