Fiber output, PM options, seed formats
FL-1053-LN-H1053 nm near-infrared single-frequency low-noise fiber laser
1053 nmFL-1053-LN-H is a 1053 nm Fiber laser. Used for wafer inspection, pumping source, scientific research. Fiber Laser. Key specifications: output / average power 10~35 W, operating mode CW, power stability (rms, 4 hours, ±3℃) <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-1053-LN-H
26 specification rows
| Output / average power | 10~35 W |
|---|---|
| Beam / notes | Fiber Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3℃) | <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Spectral linewidth (nm) | <0.004 |
| Relative intensity noise (rms,10Hz-3MHz) | <0.1%, <0.05% |
| M2 | TEM00, <1.1 |
| Fiber connector | Collimator |
| Fiber length(m) | <3 |
| Fiber jacket | Metal |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Pointing stability (urad) | <5 / <10 |
| Polarization ratio (dB) | >15, after PM fiber |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled (≤20W) / Water cooled (≤35W) |
| Operating temperature (℃) | 15-30 |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
| Selectable wavelength range(nm) | 1014-1060 |
| Typical wavelength (nm) | 1053 |
| Output power (W) | 10-35 |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
| M² | TEM00, <1.1 |
Applications
Uses named on this model’s datasheet.
- Wafer inspection
- Pumping source
- Scientific research
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-1053-LN-H with nearby fiber lasers across the wavelength range.
