Fiber output, PM options, seed formats
FL-1050-SLM1050 nm near-infrared single-frequency low-noise fiber laser
1050 nmFL-1050-SLM is a 1050 nm Fiber laser. Used for scientific research, laser radar, life science, microelectronics. Single Longitudinal Mode Infrared Laser. Key specifications: output / average power 1~10 W, operating mode CW, power stability (rms, 4 hours, ±3℃) <2%, <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-1050-SLM
24 specification rows
| Wavelength | 1050 nm |
|---|---|
| Output / average power | 1~10 W |
| Beam / notes | Single Longitudinal Mode Infrared Laser |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Frequency shift (MHz) (over ±2℃and 8 hours ) | <±200 |
| M2 | <1.1 |
| Fiber connector | FC/APC, Collimator optional |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Polarization ratio (dB) | >15, after PM fiber |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
| Temperature turning range (nm) | >0.4 |
| PZT Turning range (GHz) | >3 |
| PZT Turning bandwidth (kHz) | >5 |
| M² | <1.1 |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Laser radar
- Life science
- Microelectronics
- Wafer inspection
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-1050-SLM with nearby fiber lasers across the wavelength range.
