32 models · 3 series
976 NM Infrared Laser.
26 models| Model | Wavelength | Output / average power | Power stability (rms, 4 hours ± 3°C) | Transverse mode | Beam divergence, full angle (mrad) | Warm-up time (minutes) | Cooled method | Operating temperature (°C) | Power supply (100-240VAC) | Expected lifetime (hours) | Noise of amplitude (rms, 20Hz-20MHz) | M2 | Operating temperature (℃) | Fiber type | Fiber Core diameter | Fiber connector | Fiber jacket | Modulation option | monitoring, | Operating voltage (VDC) | Beam divergence (mrad) | Laser operation mode | Modulation optional | Connection | Storage temperature (°C) | Humidity (%) | Weight (g) | Spectral line width (MHz) | Power stability (rms, 4 hours , ±3℃) | Spectral linewidth (nm) | Fiber length (m) | Beam diameter (mm) | Polarization ratio | Operating voltage (VAC) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MDL-976(FC) | 976 nm | 1 mW~2 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-976 | 976 nm | 1~30 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-976L | 976 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-LN-976 | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | <1%, <0.5% | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-976 | 976 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-H-976 | 976 nm | 2.5~5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-F-976 | 976 nm | 5~8 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | – | PSU-H-FDA/PSU-H-LED | >10000 | <1%, <0.5% | – | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MLL-III-976-SM | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | – | – | – | – | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | – | – | – | – | SM fiber, PM fiber optional | 4-9μm, 0.12NA | FC/PC, FC/APC optional | Metal, PVC optional | DC-1kHz, 1kHz-10kHz, 10kHz-30kHz, 30kHz-100kHz optional; TTL and Analog optional | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XS-976 | 976 nm | 1~50 mW | <2%, <1%, <0.5% | Near TEM00 | <1.0 | <5 | – | – | – | >10000 | <1%, <0.5% | ~1.5 | 10-35 | – | – | – | – | AMOD (Analog) DC-100kHz | inspection | 12V/4A | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-976L | 976 nm | 1~200 mW | <2%, <1%, <0.5% | – | <1.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | <1.5 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| TEM-F-976 | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | – | <1.5 | <5 | – | 25±3 | PSU-III-FDA/PSU-III-LED/PSU-A-D | >10000 | – | <1.1 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-976 | 976 nm | 1~2500 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-H-976 | 976 nm | 2.5~5 W | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-F-976 | 976 nm | 5~8 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-XF-976 | 976 nm | 8~12 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-III-976-SM | 976 nm | 1~1000 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Conduction | 10-35 | PSU-III-FDA/PSU-III-LED/PSU-A-D/PSU-III-OEM | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-OEM-976-A | 976 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| FC-OEM-976-B | 976 nm | 1~1000 mW | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | |
| PGL-LF-976 | 976 nm | 1~10 mW | – | – | – | – | – | -10°C to +45°C | – | – | – | – | – | – | – | – | – | – | – | – | <1.5 | CW | TTL 30kHz or analog (0-3V or 0-5V) | Cable with flying leads | -20°C to +80°C | < 90 %, non-condensing | 45g | – | – | – | – | – | – | – | Datasheet |
| MSL-III-976L | 976 nm | 1~120 mW | <2%, <1%, <0.5% | – | ~2.0 | <5 | – | – | PSU-III-FDA | >10000 | <1%, <0.5% | <1.5 | 10-35 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | <100, (<50 optional) | – | – | – | – | – | – | Datasheet |
| MDL-E-976 | 976 nm | 1~30 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-976 | 976 nm | 20~50 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FC-W-976H | 976 nm | 50~150 W | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| FL-976-CW | 976 nm | 1~2 W | – | – | – | <15 | Air cooled | – | – | >10000 | – | <1.2 | 15-35 | – | – | FC/APC, Collimator optional | PVC, Metal optional | – | – | – | – | – | – | – | – | – | – | – | <3%, <2% | <0.3nm | 1 | 4±1 (Collimator output) | Random | 110/220VAC | Datasheet |
| MDL-NS-976 | 976 nm | 1~200 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
| MDL-PS-976 | 976 nm | 1~50 mW | <2%, <1%, <0.5% | Multimode | <3.0 | <5 | Air cooled | 10-35 | PSU-H-FDA/PSU-H-LED | >10000 | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | – | Datasheet |
Single Longitudinal Mode SLM Laser, Green and Infrared Single Frequency Laser AT 532 NM and 1064 NM.
1 model| Model | Wavelength | Output / average power | Spectral linewidth | Optical noise | M² | |
|---|---|---|---|---|---|---|
| 976 | 976 nm | 1~120 mW | <50 MHz optional | <0.5% | <1.5 |
High Power Laser Diode Module |
5 models| Model | Wavelength | Output / average power | Operating Voltage | Fiber Core Diameter | Fiber Cladding Diameter | Fiber Buffer Diameter | Fiber Length | Fiber Connector | Operating Temperature | Operating Relative Humidity | Cooling Mode | Storage Temperature | Storage Relative Humidity | Lead Soldering Temperature(10 s max) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LDM-976VBG-100-1 | 976 nm | 100 W | - / 24.2 / 24.8 / V | - / 105 / - / μm | 125 | 250 | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 / ℃ | - / 90 / % | – | Datasheet |
| LDM-976VBG-140-1 | 976 nm | 140 W | - / 28.9 / 29.5 / V | - / 105 / - / μm | 125 | 250 | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 / ℃ | - / 90 / % | – | Datasheet |
| LDM-976VBG-30-1 | 976 nm | 30 W | 7.2 / V | 105 / μm | - / 125 / - / μm | - / 250 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | Datasheet |
| LDM-976VBG-60-1 | 976 nm | 60 W | - / 12 / V | - / 105 / - / μm | - / 125 / - / μm | - / 250 / - / μm | 1-5 / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 | - / 90 / % | - / 250 | Datasheet |
| LDM-976VBG-9-1 | 976 nm | 9 W | 1.62 / V | 105 / μm | - / 125 / - / μm | - / 250 / - / μm | - / 1-5 / - / m | - / SMA905 / - / - | 15 / 35 | - / 75 / % | - / Water cooling(25℃) / - | -20 / 80 / ℃ | - / 90 / % | - / 250 | Datasheet |
Not sure which model fits?
Send the physics — wavelength, mode, power or energy, linewidth or pulse width, delivery, control and safety — and we qualify the source.