Technology guide
Thermopile detectors: absorption, heat flow and response time
Measure absorbed optical power with a thermal signal while respecting absorber, aperture and time-response limits.
- 01Optical power
- 02Absorber heating
- 03Temperature difference
- 04Thermoelectric signal
How it works
- A thermopile converts a temperature difference across thermocouple junctions into an electrical signal. Optical absorption supplies the heating in a thermal detector head.
- The absorber coating and entrance optics set the useful spectral response. A thermal principle does not imply equal response at every wavelength.
- Heat flow establishes the temporal response. A thermopile intended for average-power monitoring need not resolve individual short pulses.
- Beam size, position and local intensity affect the absorbing surface and the calibration conditions.
What to compare
| Parameter | Check in the specification |
|---|---|
| Spectral calibration | Use the head's calibrated band and any stated wavelength correction. |
| Aperture | Keep the whole usable beam within the specified sensitive area. |
| Power regime | Check average power, peak intensity and exposure-time limits together. |
| Time response | Separate settling time from digitiser sample rate or display update rate. |
Integration
- Choose the correct head rather than applying one instrument family's largest power rating to every model.
- Confirm cooling and mounting requirements for sustained measurements.
- Read the probe and meter pairing instructions and retain the calibration configuration.
Related products
- TS2+TP100 Laser Power Meter
Detector assembly: TS2.
- TS5+TP100 Laser Power Meter
Detector assembly: TS5.
- TS15+TP100 Laser Power Meter
Detector assembly: TS15.
References
Discuss the configuration. Send the wavelength, signal level, active area and bandwidth requirements.