Technology guide
Piezoelectric actuators: displacement, drive and feedback
Match actuator travel, capacitance, load and feedback to the trajectory the experiment needs.
- 01Drive voltage
- 02Piezo strain
- 03Mechanism
- 04Displacement
How it works
- A piezoelectric actuator changes dimension in response to an applied electric field. A stack combines many thin active layers to obtain a useful total displacement.
- A positioning assembly can transfer or amplify that displacement through flexures. Actuator stroke and moving-platform stroke are therefore different specifications.
- Open-loop motion can show hysteresis and creep. Closed-loop feedback measures a displacement-related signal and corrects the drive within the system's bandwidth.
- The actuator is an electrical load as well as a motion element. Required current grows with capacitance and the speed of voltage change.
What to compare
| Parameter | Check in the specification |
|---|---|
| Travel conditions | Keep voltage span, preload and temperature with the quoted displacement. |
| Load and stiffness | Check how force or payload changes travel and dynamic behaviour. |
| Controller current | Use the intended waveform and actuator capacitance when checking drive capability. |
| Feedback | Identify sensor type, calibrated travel and closed-loop bandwidth for the selected system. |
Integration
- Choose a controller that is explicitly compatible with the actuator voltage, sensor and connector configuration.
- Use the loaded stage resonance rather than a bare-actuator figure when planning scans.
- Separate resolution, noise, repeatability and absolute positioning accuracy in the measurement budget.
Related products
References
Discuss the configuration. Send the travel, payload, trajectory and feedback requirements.