Vibration-critical measurement
Isolate interferometry, super-resolution imaging and metrology from building floor motion.

Representative Zolix product-family image; model appearance may vary by configuration.
Opto-Mechanics · ZSR-P Series Pneumatic Vibration Isolation Optical Table, Individual Isolator
ZSR-P-30-12-WTM | support frame(steel support frame of ZSR-P optical table, with air compressor, without breadboard)
Datasheet (PDF) ↗Catalog context
ZSR-P-30-12-WTM is listed in the ZSR-P Series Pneumatic Vibration Isolation Optical Table, Individual Isolator family. Use the product-family page and any model-specific downloads available here to confirm the required configuration.
Full specifications for this product are available on request. Contact us for the datasheet.
Application context
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Isolate interferometry, super-resolution imaging and metrology from building floor motion.
Pneumatic isolators attenuate the 1–100 Hz band where structural vibration is worst.
Hold a setup stable across exposures where any relative motion is recorded as blur or drift.
Model selection
Compare ZSR-P-30-12-WTM with the closest available models in the ZSR-P Series Pneumatic Vibration Isolation Optical Table, Individual Isolator family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | ZSR-P-30-12-WTM (current) | ZSR-P-30-12-K | ZSR-P-30-15 |
|---|---|---|---|
| Size | Confirm for this model | Confirm for this model | 3000×1500×800 |
| Thickness / core | Confirm for this model | Confirm for this model | 300 |
| Hole pattern | Confirm for this model | Confirm for this model | Confirm for this model |
| Isolation / load | Confirm for this model | Confirm for this model | 3000 |
ZSR-P-15-09
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
ZSR-P-15-10
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
ZSR-P-15-12
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
ZSR-P-15-15
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
Before you specify
Engineering context for choosing this class of component, with the tradeoffs worked through on real specifications.
Opto-mechanicsVibration, thermal drift and mechanical integration are one problem. Budget the motion at the sample, then specify the table, the isolation, the mounts and the beam height that budget asks for.
Open guide
Optical microscopyDesign the trapping beam, objective, mechanics, imaging, QPD detection, calibration, and safety workflow as one instrument.
Open guide