Vibration-critical measurement
Isolate interferometry, super-resolution imaging and metrology from building floor motion.
Opto-Mechanics · ZSR-P Series Pneumatic Vibration Isolation Optical Table, Individual Isolator
ZSR-P-20-15
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
Datasheet (PDF) ↗Catalog context
Where ZSR-P-20-15 fits
ZSR-P-20-15 is listed in the ZSR-P Series Pneumatic Vibration Isolation Optical Table, Individual Isolator family. The local catalog record provides these first selection fields: Size(mm): 2000×1500×800; Tabletop pthickness(mm): 200; Tabletop pweight(Kg): 420.
Specifications
| Size(mm) | 2000×1500×800 |
|---|---|
| Tabletop pthickness(mm) | 200 |
| Tabletop pweight(Kg) | 420 |
| Supports Load(Kg) | 2000 |
| Notes | 4legs |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Upper-floor and noisy environments
Pneumatic isolators attenuate the 1–100 Hz band where structural vibration is worst.
Long-integration acquisition
Hold a setup stable across exposures where any relative motion is recorded as blur or drift.
System integration
Integration and compatibility
Use these checks to connect ZSR-P-20-15 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Top plate and core
- Tabletop pthickness(mm): 200
- Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
- Size and working area
- Size(mm): 2000×1500×800
- Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
- Load capacity
- Tabletop pweight(Kg): 420 · Supports Load(Kg): 2000
- Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Technical FAQ
Integration questions for ZSR-P-20-15
How is the ZSR-P-20-15 constructed?
Tabletop pthickness(mm): 200. Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
What size is the ZSR-P-20-15?
Size(mm): 2000×1500×800. Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
What load does the ZSR-P-20-15 support?
Tabletop pweight(Kg): 420 · Supports Load(Kg): 2000. Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Model selection
Nearby series comparison
Compare ZSR-P-20-15 with the closest available models in the ZSR-P Series Pneumatic Vibration Isolation Optical Table, Individual Isolator family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | ZSR-P-20-15 (current) | ZSR-P-20-12-WTM | ZSR-P-20-15-K |
|---|---|---|---|
| Size | 2000×1500×800 | Confirm for this model | Confirm for this model |
| Thickness / core | 200 | Confirm for this model | Confirm for this model |
| Hole pattern | Confirm for this model | Confirm for this model | Confirm for this model |
| Isolation / load | 2000 | Confirm for this model | Confirm for this model |
Related products
ZSR-P-15-09
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
ZSR-P-15-10
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
ZSR-P-15-12
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
ZSR-P-15-15
Pneumatic Isolation Optical Table | Not in the catalog, not in stock, contact sales
