Vibration-critical measurement
Isolate interferometry, super-resolution imaging and metrology from building floor motion.
Opto-Mechanics · TPR Series Pneumatic Vibration Isolation Optical Table
TPR35-12
Pneumatic Isolation Optical Table | 3500×1200×800mm；
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where TPR35-12 fits
TPR35-12 is listed in the TPR Series Pneumatic Vibration Isolation Optical Table family. The local catalog record provides these first selection fields: Size(mm): 3500×1200×800; Tabletop pthickness(mm): 300; Tabletop pweight(Kg): 701.
Specifications
| Size(mm) | 3500×1200×800 |
|---|---|
| Tabletop pthickness(mm) | 300 |
| Tabletop pweight(Kg) | 701 |
| Table Feet Area(mm) | 160×160 |
| Supports Load(Kg) | 1500 |
| Notes | 6legs |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Upper-floor and noisy environments
Pneumatic isolators attenuate the 1–100 Hz band where structural vibration is worst.
Long-integration acquisition
Hold a setup stable across exposures where any relative motion is recorded as blur or drift.
System integration
Integration and compatibility
Use these checks to connect TPR35-12 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Top plate and core
- Tabletop pthickness(mm): 300
- Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
- Size and working area
- Size(mm): 3500×1200×800
- Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
- Load capacity
- Tabletop pweight(Kg): 701 · Supports Load(Kg): 1500
- Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Technical FAQ
Integration questions for TPR35-12
How is the TPR35-12 constructed?
Tabletop pthickness(mm): 300. Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
What size is the TPR35-12?
Size(mm): 3500×1200×800. Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
What load does the TPR35-12 support?
Tabletop pweight(Kg): 701 · Supports Load(Kg): 1500. Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Model selection
Nearby series comparison
Compare TPR35-12 with the closest available models in the TPR Series Pneumatic Vibration Isolation Optical Table family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | TPR35-12 (current) | TPR30-15-WTM | TPR35-12-WTM |
|---|---|---|---|
| Size | 3500×1200×800 | Confirm for this model | Confirm for this model |
| Thickness / core | 300 | Confirm for this model | Confirm for this model |
| Hole pattern | Confirm for this model | Confirm for this model | Confirm for this model |
| Isolation / load | 1500 | Confirm for this model | Confirm for this model |
