Vibration-critical measurement
Isolate interferometry, super-resolution imaging and metrology from building floor motion.
Opto-Mechanics · ZTP Series Pneumatic Vibration Isolation Optical Table
ZTP15-10
Pneumatic Isolation Optical Table | 1500×1000×800mm；
Datasheet (PDF) ↗Catalog context
Where ZTP15-10 fits
ZTP15-10 is listed in the ZTP Series Pneumatic Vibration Isolation Optical Table family. The local catalog record provides these first selection fields: Size(mm): 1500×1000×800; Tabletop pthickness(mm): 200; Tabletop pweight(Kg): 210.
Specifications
| Size(mm) | 1500×1000×800 |
|---|---|
| Tabletop pthickness(mm) | 200 |
| Tabletop pweight(Kg) | 210 |
| Table Feet Area(mm) | 160×160 |
| Supports Load(Kg) | 600 |
| Notes | 4legs |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Upper-floor and noisy environments
Pneumatic isolators attenuate the 1–100 Hz band where structural vibration is worst.
Long-integration acquisition
Hold a setup stable across exposures where any relative motion is recorded as blur or drift.
System integration
Integration and compatibility
Use these checks to connect ZTP15-10 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Top plate and core
- Tabletop pthickness(mm): 200
- Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
- Size and working area
- Size(mm): 1500×1000×800
- Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
- Load capacity
- Tabletop pweight(Kg): 210 · Supports Load(Kg): 600
- Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Technical FAQ
Integration questions for ZTP15-10
How is the ZTP15-10 constructed?
Tabletop pthickness(mm): 200. Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
What size is the ZTP15-10?
Size(mm): 1500×1000×800. Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
What load does the ZTP15-10 support?
Tabletop pweight(Kg): 210 · Supports Load(Kg): 600. Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Model selection
Nearby series comparison
Compare ZTP15-10 with the closest available models in the ZTP Series Pneumatic Vibration Isolation Optical Table family. Confirm option-dependent values on the final configuration before ordering.
