Laboratory optical integration
The component is selected by matching its interfaces and error contribution to the complete instrument budget.
Representative Zolix product-family image; model appearance may vary by configuration.
Opto-Mechanics · Pneumatic Isolation Optical Tab
ZTB24-15
Pneumatic Isolation Optical Table | 2400×1500×800mm； | Not in the catalog, not in stock, contact sales
Catalog context
Where ZTB24-15 fits
ZTB24-15 is listed in the Pneumatic Isolation Optical Tab family. Use the product-family page and any model-specific downloads available here to confirm the required configuration.
Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Engineering reference
Specify ZTB24-15 from the interfaces inward
ZTB24-15 is a configurable configurable scientific component in the Pneumatic Isolation Optical Tab family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
This component must be qualified inside the complete optical, mechanical and electrical chain. Interfaces, performance limits and environmental conditions are coupled; a model name alone is not sufficient to release an instrument design.
The local price-list record does not provide a complete model specification or datasheet. These fields identify what must be confirmed on the model drawing and quotation without inventing an option-dependent value.
Configuration fields to confirm
- Primary function
- State the required optical or mechanical result and the measurement tolerance.
- Operating range
- Define wavelength, motion, frequency or other applicable working range.
- Performance budget
- Set allowable loss, noise, drift, error and safety margin.
- Physical interface
- Confirm dimensions, aperture, connector, thread, hole pattern and datum surfaces.
- Control interface
- Specify supply, command, feedback, trigger and communications requirements.
- Environment
- State temperature, vacuum, humidity, contamination and duty-cycle conditions.
Qualification sequence
- 1Define the measurement objective and the performance limit that ZTB24-15 must satisfy.
- 2Freeze wavelength, mechanical, fiber and electrical interfaces before selecting option codes.
- 3Check loss, noise, heat, motion or vibration contributions in the complete system budget.
- 4Confirm the final drawing, pinout, environmental suffix and acceptance test with the quotation.
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Research instrument development
A documented configuration prevents optical, mechanical and control assumptions from becoming integration failures.
Technical FAQ
Integration questions for ZTB24-15
What must be specified before ordering ZTB24-15?
Confirm primary function, operating range, performance budget, physical interface, control interface, and environment. These fields are coupled, so the final part number should be checked against the complete instrument rather than selected from the model name alone.
How should ZTB24-15 be integrated into the system?
This component must be qualified inside the complete optical, mechanical and electrical chain. Interfaces, performance limits and environmental conditions are coupled; a model name alone is not sufficient to release an instrument design. Freeze the optical, mechanical and electrical interfaces before releasing the surrounding assembly.
Which documentation should be approved for ZTB24-15?
Approve the configuration-specific specification, mechanical drawing, connector or pinout definition, environmental suffix and acceptance-test limits supplied with the quotation. Any field absent from the local record remains a confirmation item, not an assumed capability.
Model selection
Nearby series comparison
Compare ZTB24-15 with the closest available models in the Pneumatic Isolation Optical Tab family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | ZTB24-15 (current) | ZTB24-12 | ZTB30-12 |
|---|---|---|---|
| Size | Confirm for this model | Confirm for this model | Confirm for this model |
| Thickness / core | Confirm for this model | Confirm for this model | Confirm for this model |
| Hole pattern | Confirm for this model | Confirm for this model | Confirm for this model |
| Isolation / load | Confirm for this model | Confirm for this model | Confirm for this model |
Related products
ZTB10-08
Pneumatic Isolation Optical Table | 1000×800×800mm； | Not in the catalog, not in stock, contact sales
ZTB12-08
Pneumatic Isolation Optical Table | 1200×800×800mm； | Not in the catalog, not in stock, contact sales
ZTB12-09
Pneumatic Isolation Optical Table | 1200×900×800mm； | Not in the catalog, not in stock, contact sales
ZTB15-09
Pneumatic Isolation Optical Table | 1500×900×800mm； | Not in the catalog, not in stock, contact sales
