Broadband structural damping
Suppress resonances in the tabletop itself, not only the vibration arriving from the floor.
Opto-Mechanics · DRP Series Damping Vibration Isolation Optical Table
DRP30-20
Double Damping Vibration Isolation Optical Table | 3000×2000×800mm；
Datasheet (PDF) ↗Catalog context
Where DRP30-20 fits
DRP30-20 is listed in the DRP Series Damping Vibration Isolation Optical Table family. The local catalog record provides these first selection fields: Size(mm): 3000×2000×800; Tabletop pthickness(mm): 300; Tabletop pweight(Kg): 1002.
Specifications
| Size(mm) | 3000×2000×800 |
|---|---|
| Tabletop pthickness(mm) | 300 |
| Tabletop pweight(Kg) | 1002 |
| Table Feet Area(mm) | 200×200 |
| Supports Load(Kg) | 1950 |
| Notes | 6legs |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
High-power and ultrafast laser layouts
Long folded beam paths amplify angular drift, so surface stability governs pointing at the far end.
Shared multi-user laboratories
Keep the motion and stage acceleration of one experiment from disturbing another on the same surface.
System integration
Integration and compatibility
Use these checks to connect DRP30-20 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Top plate and core
- Tabletop pthickness(mm): 300
- Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
- Size and working area
- Size(mm): 3000×2000×800
- Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
- Load capacity
- Tabletop pweight(Kg): 1002 · Supports Load(Kg): 1950
- Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Technical FAQ
Integration questions for DRP30-20
How is the DRP30-20 constructed?
Tabletop pthickness(mm): 300. Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
What size is the DRP30-20?
Size(mm): 3000×2000×800. Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
What load does the DRP30-20 support?
Tabletop pweight(Kg): 1002 · Supports Load(Kg): 1950. Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Model selection
Nearby series comparison
Compare DRP30-20 with the closest available models in the DRP Series Damping Vibration Isolation Optical Table family. Confirm option-dependent values on the final configuration before ordering.
