Broadband structural damping
Suppress resonances in the tabletop itself, not only the vibration arriving from the floor.
Opto-Mechanics · DRP Series Damping Vibration Isolation Optical Table
DRP15-10
Double Damping Vibration Isolation Optical Table | 1500×1000×800mm；
Datasheet (PDF) ↗Catalog context
Where DRP15-10 fits
DRP15-10 is listed in the DRP Series Damping Vibration Isolation Optical Table family. The local catalog record provides these first selection fields: Size(mm): 1500×1000×800; Tabletop pthickness(mm): 200; Tabletop pweight(Kg): 210.
Specifications
| Size(mm) | 1500×1000×800 |
|---|---|
| Tabletop pthickness(mm) | 200 |
| Tabletop pweight(Kg) | 210 |
| Table Feet Area(mm) | 200×200 |
| Supports Load(Kg) | 1300 |
| Notes | 4legs |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
High-power and ultrafast laser layouts
Long folded beam paths amplify angular drift, so surface stability governs pointing at the far end.
Shared multi-user laboratories
Keep the motion and stage acceleration of one experiment from disturbing another on the same surface.
System integration
Integration and compatibility
Use these checks to connect DRP15-10 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Top plate and core
- Tabletop pthickness(mm): 200
- Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
- Size and working area
- Size(mm): 1500×1000×800
- Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
- Load capacity
- Tabletop pweight(Kg): 210 · Supports Load(Kg): 1300
- Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Technical FAQ
Integration questions for DRP15-10
How is the DRP15-10 constructed?
Tabletop pthickness(mm): 200. Skin thickness and core construction set the stiffness that the isolation system is then asked to support. A thin-skinned top on good isolators still flexes locally under a clamped load.
What size is the DRP15-10?
Size(mm): 1500×1000×800. Lay the intended optical path out on the stated working area before ordering. Beam paths grow, and a table that is exactly large enough on paper is generally too small in practice.
What load does the DRP15-10 support?
Tabletop pweight(Kg): 210 · Supports Load(Kg): 1300. Budget the installed mass including instruments that arrive later. Pneumatic isolators in particular have a working load band rather than a single maximum, and behave poorly below it as well as above.
Model selection
Nearby series comparison
Compare DRP15-10 with the closest available models in the DRP Series Damping Vibration Isolation Optical Table family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | DRP15-10 (current) | DRP15-09-WTM | DRP15-10-WTM |
|---|---|---|---|
| Size | 1500×1000×800 | Confirm for this model | Confirm for this model |
| Thickness / core | 200 | Confirm for this model | Confirm for this model |
| Hole pattern | Confirm for this model | Confirm for this model | Confirm for this model |
| Isolation / load | 1300 | Confirm for this model | Confirm for this model |
