Precision optical metrology
Stable beam paths require table bending, floor vibration and support resonances to remain below the displacement and pointing budget of the measurement.
Representative Zolix product-family image; model appearance may vary by configuration.
Opto-Mechanics · Damping Isolation Optical Table
DRB35-15
Double Damping Vibration Isolation Optical Table | 3500×1500×800mm；. DRB35-15 is a configurable optical support structure in the Damping Isolation Optical Table family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
Catalog context
Where DRB35-15 fits
DRB35-15 is listed in the Damping Isolation Optical Table family. Use the product-family page and any model-specific downloads available here to confirm the required configuration.
Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Engineering reference
Specify DRB35-15 from the interfaces inward
DRB35-15 is a configurable optical support structure in the Damping Isolation Optical Table family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
An optical support structure is part of the measurement loop, not passive furniture. Its dimensions, bending stiffness, damping, support locations and hole pattern determine whether aligned components remain within the experiment’s displacement and angular-error budget.
The local price-list record does not provide a complete model specification or datasheet. These fields identify what must be confirmed on the model drawing and quotation without inventing an option-dependent value.
Configuration fields to confirm
- Working area
- Confirm length, width and clear perimeter against the complete optical layout.
- Mounting grid
- Select M6 on a 25 mm metric grid or 1/4"-20 on a 1 inch imperial grid and verify border offsets.
- Thickness and stiffness
- Check thickness, core construction, flatness and distributed-load deflection.
- Vibration performance
- State the disturbance spectrum and required damping or isolation around sensitive resonances.
- Support system
- Match leg height, leveling range, isolator type and load capacity to the installed mass and center of gravity.
- Utilities and access
- Reserve cable, cooling, enclosure and service access without bridging the isolated structure.
Qualification sequence
- 1Define the measurement objective and the performance limit that DRB35-15 must satisfy.
- 2Freeze wavelength, mechanical, fiber and electrical interfaces before selecting option codes.
- 3Check loss, noise, heat, motion or vibration contributions in the complete system budget.
- 4Confirm the final drawing, pinout, environmental suffix and acceptance test with the quotation.
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Microscopy and laser experiments
A defined mounting grid and damped support make multi-component layouts repeatable while preserving access for objectives, cameras and beam-delivery hardware.
Technical FAQ
Integration questions for DRB35-15
What must be specified before ordering DRB35-15?
Confirm working area, mounting grid, thickness and stiffness, vibration performance, support system, and utilities and access. These fields are coupled, so the final part number should be checked against the complete instrument rather than selected from the model name alone.
How should DRB35-15 be integrated into the system?
An optical support structure is part of the measurement loop, not passive furniture. Its dimensions, bending stiffness, damping, support locations and hole pattern determine whether aligned components remain within the experiment’s displacement and angular-error budget. Freeze the optical, mechanical and electrical interfaces before releasing the surrounding assembly.
Which documentation should be approved for DRB35-15?
Approve the configuration-specific specification, mechanical drawing, connector or pinout definition, environmental suffix and acceptance-test limits supplied with the quotation. Any field absent from the local record remains a confirmation item, not an assumed capability.
Model selection
Nearby series comparison
Compare DRB35-15 with the closest available models in the Damping Isolation Optical Table family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | DRB35-15 (current) | DRB35-12 | DRN09-06 |
|---|---|---|---|
| Size | Confirm for this model | Confirm for this model | Confirm for this model |
| Thickness / core | Confirm for this model | Confirm for this model | Confirm for this model |
| Hole pattern | Confirm for this model | Confirm for this model | Confirm for this model |
| Isolation / load | Confirm for this model | Confirm for this model | Confirm for this model |
Related products
SRB06-06
Damping Vibration Isolation Optical Table | 600×600×800mm. SRB06-06 is a configurable optical support structure in the Damping Isolation Optical Table family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
SRB09-06
Damping Vibration Isolation Optical Table | 900×600×800mm；. SRB09-06 is a configurable optical support structure in the Damping Isolation Optical Table family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
SRB10-08
Damping Vibration Isolation Optical Table | 1000×800×800mm；. SRB10-08 is a configurable optical support structure in the Damping Isolation Optical Table family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
SRB12-06
Damping Vibration Isolation Optical Table | 1200×600×800mm；. SRB12-06 is a configurable optical support structure in the Damping Isolation Optical Table family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
