Pre-aligned optical axes
Four rods define the axis, so every element threaded onto them starts square and centred.
Cage Systems · 30mm Cage Plates
CSP1-25.4
30mm Cage Plates
Zolix offers a wide range of cage plates ideally suit for assembling Ø25.4mm optics or lens tubes.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where CSP1-25.4 fits
CSP1-25.4 is listed as 30mm Cage Plates in the 30mm Cage Plates family. The local catalog record provides these first selection fields: Plate Thickness: 9mm; Acceptable Optic Thickness: 5mm; Material: 6061 Aluminum Alloy.
Specifications
| Plate Thickness | 9mm |
|---|---|
| Acceptable Optic Thickness | 5mm |
| Material | 6061 Aluminum Alloy |
| Surface Treatment | Black Anodic-Oxidation |
| Optic Diameter | Optic Diameter |
| Post Mounting | M4 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Modular subassembly building
Build a relay, filter block or launch module that can be moved between setups intact.
Compact instrument integration
Package an optical train into a rigid unit for OEM and portable instruments.
System integration
Integration and compatibility
Use these checks to connect CSP1-25.4 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optic it accepts
- Acceptable Optic Thickness: 5mm · Optic Diameter: Optic Diameter
- Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
- Mounting interface
- Post Mounting: M4
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Material and finish
- Material: 6061 Aluminum Alloy · Surface Treatment: Black Anodic-Oxidation
- Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
Technical FAQ
Integration questions for CSP1-25.4
Which optics fit the CSP1-25.4?
Acceptable Optic Thickness: 5mm · Optic Diameter: Optic Diameter. Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
How does the CSP1-25.4 mount?
Post Mounting: M4. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What is the CSP1-25.4 made from?
Material: 6061 Aluminum Alloy · Surface Treatment: Black Anodic-Oxidation. Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
Model selection
Nearby series comparison
Compare CSP1-25.4 with the closest available models in the 30mm Cage Plates family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | CSP1-25.4 (current) | CSP1-RMS | CSP1-SM1 |
|---|---|---|---|
| Optic accepted | 5mm | Confirm for this model | Confirm for this model |
| Adjustment | Confirm for this model | Confirm for this model | Confirm for this model |
| Mounting interface | M4 | Confirm for this model | Confirm for this model |
| Material | 6061 Aluminum Alloy | Confirm for this model | Confirm for this model |
