Precision optical alignment
Adjustment sensitivity and locking behavior determine whether the beam can be centered and remain aligned after handling.
Representative Zolix product-family image; model appearance may vary by configuration.
Opto-Mechanics · Mirror Mount & Cage System
OMUM52-1
Universal optics mount. Availability: listed as non-standard/not-stocked; confirm lead time before quoting.
Catalog context
Where OMUM52-1 fits
OMUM52-1 is listed in the Mirror Mount & Cage System family. Use the product-family page and any model-specific downloads available here to confirm the required configuration.
Specifications
Full specifications for this product are available on request. Contact us for the datasheet.
Engineering reference
Specify OMUM52-1 from the interfaces inward
OMUM52-1 is a configurable optical mounting component in the Mirror Mount & Cage System family. The final part number should be released only after the optical, mechanical, electrical and environmental fields below are matched to the intended instrument.
An optical mount locates an optic relative to mechanical datums while controlling stress and angular drift. Optic size, clear aperture, axis height, adjustment sensitivity, locking behavior and base pattern must be matched as one geometry.
The local price-list record does not provide a complete model specification or datasheet. These fields identify what must be confirmed on the model drawing and quotation without inventing an option-dependent value.
Configuration fields to confirm
- Optic or payload
- Confirm diameter, thickness, shape, mass and allowable clamping stress.
- Optical geometry
- State clear aperture, optical-axis height and required orientation.
- Adjustment
- Define angular or linear range, sensitivity, resolution and lock requirement.
- Stability
- Set stiffness, drift and return-to-position requirements under expected thermal change.
- Base interface
- Match M6/25 mm or 1/4"-20/1 inch mounting, footprint and datum surfaces.
- Environment
- Confirm vacuum, cryogenic, non-magnetic or cleanroom material requirements.
Qualification sequence
- 1Define the measurement objective and the performance limit that OMUM52-1 must satisfy.
- 2Freeze wavelength, mechanical, fiber and electrical interfaces before selecting option codes.
- 3Check loss, noise, heat, motion or vibration contributions in the complete system budget.
- 4Confirm the final drawing, pinout, environmental suffix and acceptance test with the quotation.
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Modular laboratory assemblies
Axis height and hole pattern allow the component to exchange with neighboring optics without rebuilding the reference geometry.
Technical FAQ
Integration questions for OMUM52-1
What must be specified before ordering OMUM52-1?
Confirm optic or payload, optical geometry, adjustment, stability, base interface, and environment. These fields are coupled, so the final part number should be checked against the complete instrument rather than selected from the model name alone.
How should OMUM52-1 be integrated into the system?
An optical mount locates an optic relative to mechanical datums while controlling stress and angular drift. Optic size, clear aperture, axis height, adjustment sensitivity, locking behavior and base pattern must be matched as one geometry. Freeze the optical, mechanical and electrical interfaces before releasing the surrounding assembly.
Which documentation should be approved for OMUM52-1?
Approve the configuration-specific specification, mechanical drawing, connector or pinout definition, environmental suffix and acceptance-test limits supplied with the quotation. Any field absent from the local record remains a confirmation item, not an assumed capability.
Model selection
Nearby series comparison
Compare OMUM52-1 with the closest available models in the Mirror Mount & Cage System family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | OMUM52-1 (current) | OMUM40-1 | OMUM52-2 |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | Confirm for this model | Confirm for this model | Confirm for this model |
| Mounting interface | Confirm for this model | Confirm for this model | Confirm for this model |
| Material | Confirm for this model | Confirm for this model | Confirm for this model |
Related products
OMUS12.7-B
OMUS12.7-B kinematic optical mirror mount for 12.7 mm optic; pitch/yaw adjustment for beam steering and optical alignment. Lifecycle: legacy item; confirm replacement before quoting.
OMUS20-B
OMUS20-B kinematic optical mirror mount for 20 mm optic; pitch/yaw adjustment for beam steering and optical alignment. Lifecycle: legacy item; confirm replacement before quoting.
OMUS25.4-B
OMUS25.4-B kinematic optical mirror mount for 25.4 mm optic; pitch/yaw adjustment for beam steering and optical alignment. Lifecycle: legacy item; confirm replacement before quoting.
OMUS38.1-B
OMUS38.1-B kinematic optical mirror mount for 38.1 mm optic; pitch/yaw adjustment for beam steering and optical alignment. Lifecycle: legacy item; confirm replacement before quoting.
