Setting beam height
Hold every optic in a path at one consistent deck height so components can be swapped without realignment.
Posts and Post Holders · NPHR Series Mounting Post
NPHR38-500
NPHR Series Mounting Post
Designed for bearing heavy loads, this mounting post is compatible with the PHCR-1(A) mounting clamp, which includes a gear and rack mechanism for precise, continuous height adjustment.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where NPHR38-500 fits
NPHR38-500 is listed as NPHR Series Mounting Post in the NPHR Series Mounting Post family. The local catalog record provides these first selection fields: Overall Height H(mm): 500; Main Body Material and Surface Treatment: Black anodized aluminium alloy; Mounting Hole: Ø6.5 counter bore.
Specifications
| Overall Height H(mm) | 500 |
|---|---|
| Main Body Material and Surface Treatment | Black anodized aluminium alloy |
| Mounting Hole | Ø6.5 counter bore |
| Net Weight(Kg) | 1.02 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Mounting optics to the table
The structural link between an optic and the breadboard, where stiffness decides how well alignment survives.
Rapid reconfiguration
Slide-and-clamp holders let a layout be rebuilt without unbolting the whole assembly.
System integration
Integration and compatibility
Use these checks to connect NPHR38-500 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Mounting interface
- Mounting Hole: Ø6.5 counter bore
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Material and finish
- Main Body Material and Surface Treatment: Black anodized aluminium alloy
- Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
- Dimensions and mass
- Net Weight(Kg): 1.02
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for NPHR38-500
How does the NPHR38-500 mount?
Mounting Hole: Ø6.5 counter bore. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What is the NPHR38-500 made from?
Main Body Material and Surface Treatment: Black anodized aluminium alloy. Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
What are the dimensions of the NPHR38-500?
Net Weight(Kg): 1.02. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare NPHR38-500 with the closest available models in the NPHR Series Mounting Post family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | NPHR38-500 (current) | NPHR38-356 | NPHR38R-178 |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | Confirm for this model | Confirm for this model | Confirm for this model |
| Mounting interface | Ø6.5 counter bore | Ø6.5 counter bore | Ø6.5 counter bore |
| Material | Black anodized aluminium alloy | Black anodized aluminium alloy | Black anodized aluminium alloy |
