Setting beam height
Hold every optic in a path at one consistent deck height so components can be swapped without realignment.
Posts and Post Holders · Ø12 PHSH series Post Holder
PHSH-5
Ø12 PHSH series Post Holder
Brief Introduction: The PHSH series is usually used with the PHSP12 series posts.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where PHSH-5 fits
PHSH-5 is listed as Ø12 PHSH series Post Holder in the Ø12 PHSH series Post Holder family. The local catalog record provides these first selection fields: Model: PHSH-5; Overall Height L(mm): 150; Net Weight(Kg): 0.15.
Specifications
| Model | PHSH-5 |
|---|---|
| Overall Height L(mm) | 150 |
| Net Weight(Kg) | 0.15 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Mounting optics to the table
The structural link between an optic and the breadboard, where stiffness decides how well alignment survives.
Rapid reconfiguration
Slide-and-clamp holders let a layout be rebuilt without unbolting the whole assembly.
System integration
Integration and compatibility
Use these checks to connect PHSH-5 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Dimensions and mass
- Net Weight(Kg): 0.15
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for PHSH-5
What are the dimensions of the PHSH-5?
Net Weight(Kg): 0.15. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare PHSH-5 with the closest available models in the Ø12 PHSH series Post Holder family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | PHSH-5 (current) | PHSH-4 | PHSH-3 |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | Confirm for this model | Confirm for this model | Confirm for this model |
| Mounting interface | Confirm for this model | Confirm for this model | Confirm for this model |
| Material | Confirm for this model | Confirm for this model | Confirm for this model |
