Non-standard optic geometry
Hold components that do not fit a circular mount — wedges, assemblies and custom substrates.
Special Mounts · MAD-M22 series Adaptors for OMxA Kinematic Mount
MAD-M22-LD12
MAD-M22 series Adaptors for OMxA Kinematic Mount
MAD is an adaptor for OMxA kinematic mount, connect different kinds of microscope objectives, laser beam expanders, C-mounts etc.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where MAD-M22-LD12 fits
MAD-M22-LD12 is listed as MAD-M22 series Adaptors for OMxA Kinematic Mount in the MAD-M22 series Adaptors for OMxA Kinematic Mount family. The local catalog record provides these first selection fields: Model: MAD-M22-LD12; Mount items: LED; Overall Thickness A(mm): 16.5.
Specifications
| Model | MAD-M22-LD12 |
|---|---|
| Mount items | LED |
| Overall Thickness A(mm) | 16.5 |
| Front Plate Thinckness B(mm) | 8.5 |
| Optics Thickness C(mm) | Ø12 |
| Overall Diameter D(mm) | Ø31 |
| Clear Aperture d(mm) | / |
| Interface Size(mm) | M22 X 0.75 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Constrained mounting positions
Reach optics in places where a standard post and holder will not physically fit.
Application-specific fixturing
Purpose-built retention for a component whose handling requirements are unusual.
System integration
Integration and compatibility
Use these checks to connect MAD-M22-LD12 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optic it accepts
- Optics Thickness C(mm): Ø12 · Clear Aperture d(mm): /
- Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
- Mounting interface
- MAD-M22-LD12
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
Technical FAQ
Integration questions for MAD-M22-LD12
Which optics fit the MAD-M22-LD12?
Optics Thickness C(mm): Ø12 · Clear Aperture d(mm): /. Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
How does the MAD-M22-LD12 mount?
MAD-M22-LD12. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
Model selection
Nearby series comparison
Compare MAD-M22-LD12 with the closest available models in the MAD-M22 series Adaptors for OMxA Kinematic Mount family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MAD-M22-LD12 (current) | MAD-M22-FC | MAD-M22-OL |
|---|---|---|---|
| Optic accepted | Ø12 | FC connector | 4/5"-1/36 |
| Adjustment | Confirm for this model | Confirm for this model | Confirm for this model |
| Mounting interface | Confirm for this model | Confirm for this model | Confirm for this model |
| Material | Confirm for this model | Confirm for this model | Confirm for this model |
