Non-standard optic geometry
Hold components that do not fit a circular mount — wedges, assemblies and custom substrates.
Special Mounts · OMHS series Special Kinematic Mount
OMHS-LBE22
OMHS series Special Kinematic Mount
OMHS Series Special Kinematic Mounts are based on the OMHS structure, it is specifically designed for mounting with a laser beam expander, microscope objective, and C-mount lens.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where OMHS-LBE22 fits
OMHS-LBE22 is listed as OMHS series Special Kinematic Mount in the OMHS series Special Kinematic Mount family. The local catalog record provides these first selection fields: Model: OMHS-LBE22; Number of Tuning Axis: 3D; Interface size A: M22×0.75.
Specifications
| Model | OMHS-LBE22 |
|---|---|
| Number of Tuning Axis | 3D |
| Interface size A | M22×0.75 |
| Tilt Adjust Range( ° ) | ±3 |
| Tip Adjust Range( ° ) | ±3 |
| Translation Range (mm) | MAX6 |
| Tilt Resolution: angular adjustment per revolution( ° ) | ≈0.39 |
| Tip Resolution: angular adjustment per revolution( ° ) | ≈0.39 |
| Main Body Material and Treatment | Black anodized aluminium alloy |
| Optic Center Height (mm) | 25 |
| Fixed Plate Thickness(mm) | 18 |
| Number of Pulling Spring | 2 |
| Mounting Hole | M6, counter boreØ8 |
| Net Weightl(g) | 85 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Constrained mounting positions
Reach optics in places where a standard post and holder will not physically fit.
Application-specific fixturing
Purpose-built retention for a component whose handling requirements are unusual.
System integration
Integration and compatibility
Use these checks to connect OMHS-LBE22 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Mounting interface
- Mounting Hole: M6, counter boreØ8
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Adjustment
- Tilt Adjust Range( ° ): ±3 · Tip Adjust Range( ° ): ±3
- Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
- Material and finish
- Main Body Material and Treatment: Black anodized aluminium alloy
- Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
- Dimensions and mass
- Net Weightl(g): 85
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for OMHS-LBE22
How does the OMHS-LBE22 mount?
Mounting Hole: M6, counter boreØ8. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What adjustment range does the OMHS-LBE22 offer?
Tilt Adjust Range( ° ): ±3 · Tip Adjust Range( ° ): ±3. Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
What is the OMHS-LBE22 made from?
Main Body Material and Treatment: Black anodized aluminium alloy. Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
What are the dimensions of the OMHS-LBE22?
Net Weightl(g): 85. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare OMHS-LBE22 with the closest available models in the OMHS series Special Kinematic Mount family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | OMHS-LBE22 (current) | OMHS-Cmount | OMHS-WJ |
|---|---|---|---|
| Optic accepted | Confirm for this model | Confirm for this model | Confirm for this model |
| Adjustment | ±3 | ±3 | ±3 |
| Mounting interface | M6, counter boreØ8 | M6, counter boreØ8 | M6, counter boreØ8 |
| Material | Black anodized aluminium alloy | Black anodized aluminium alloy | Black anodized aluminium alloy |
