MFW12-25

Application context

Why this design is used

Application guidance is derived from the product family and tied to the model-specific selection fields above.

System integration

Integration and compatibility

Use these checks to connect MFW12-25 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optic it accepts

Optic Size (mm): φ25/φ25.4 · Optics Thickness (mm): 1~6

Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.

Mounting interface

Mounting Hole: 2*M4 M6,2*M4

Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.

Material and finish

Main Body Material and Treatment: Aluminium alloy, surface treated by black anodic oxidation.

Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.

Dimensions and mass

Net Weight (g): 270

Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.

Technical FAQ

Integration questions for MFW12-25