Swapping filters mid-experiment
Change spectral band without disturbing the alignment of the surrounding path.
Filter Mounts · MFW series Manual Filter Wheel
MFW6-25
MFW series Manual Filter Wheel
High-quality materials: The main body is made of high-quality aluminium alloy, and the surface treated by black anodic oxidation.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where MFW6-25 fits
MFW6-25 is listed as MFW series Manual Filter Wheel in the MFW series Manual Filter Wheel family. The local catalog record provides these first selection fields: Optic Size (mm): φ25/φ25.4; Optics Thickness (mm): 1~6; Clear Aperture (mm): φ22.
Specifications
| Optic Size (mm) | φ25/φ25.4 |
|---|---|
| Optics Thickness (mm) | 1~6 |
| Clear Aperture (mm) | φ22 |
| Fliter Slot Number | 6 |
| Optic Center Height (mm) | 50 |
| Overall Width (mm) | 82 |
| Overall Thickness (mm) | 44.5 |
| Main Body Material and Treatment | Aluminium alloy, surface treated by black anodic oxidation. |
| Mounting Hole | 2*M4 M6,2*M4 |
| Net Weight (g) | 190 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Fluorescence and Raman filtering
Hold excitation, emission and notch filters at the correct orientation to the beam.
Neutral density and attenuation
Set power levels reproducibly ahead of a detector or sample.
System integration
Integration and compatibility
Use these checks to connect MFW6-25 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optic it accepts
- Optic Size (mm): φ25/φ25.4 · Optics Thickness (mm): 1~6
- Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
- Mounting interface
- Mounting Hole: 2*M4 M6,2*M4
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Material and finish
- Main Body Material and Treatment: Aluminium alloy, surface treated by black anodic oxidation.
- Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
- Dimensions and mass
- Net Weight (g): 190
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for MFW6-25
Which optics fit the MFW6-25?
Optic Size (mm): φ25/φ25.4 · Optics Thickness (mm): 1~6. Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
How does the MFW6-25 mount?
Mounting Hole: 2*M4 M6,2*M4. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What is the MFW6-25 made from?
Main Body Material and Treatment: Aluminium alloy, surface treated by black anodic oxidation.. Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
What are the dimensions of the MFW6-25?
Net Weight (g): 190. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare MFW6-25 with the closest available models in the MFW series Manual Filter Wheel family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MFW6-25 (current) | MFW12-25 |
|---|---|---|
| Optic accepted | φ25/φ25.4 | φ25/φ25.4 |
| Adjustment | Confirm for this model | Confirm for this model |
| Mounting interface | 2*M4 M6,2*M4 | 2*M4 M6,2*M4 |
| Material | Aluminium alloy, surface treated by black anodic oxidation. | Aluminium alloy, surface treated by black anodic oxidation. |
