Beam steering
Two-axis angular adjustment for directing a beam between components on the table.
Kinematic Mirror Mount · NMC Series Center Kinematic Mirror Mounts
NMC25.4
NMC Series Center Kinematic Mirror Mounts
High-quality material: the main body is high-quality aluminum alloy, and the surface is treated with black anodized oxidation; High sensitivity: The use of two 0.2mm pitch ultra-fine screw (except NMC12.7) for two-dimensional adjustment, with higher sensitivit
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where NMC25.4 fits
NMC25.4 is listed as NMC Series Center Kinematic Mirror Mounts in the NMC Series Center Kinematic Mirror Mounts family. The local catalog record provides these first selection fields: Optic Size(mm): φ25/φ25.4; Optic Edge Thickness(mm): 4~20; Angular Range(。): ±3.
Specifications
| Optic Size(mm) | φ25/φ25.4 |
|---|---|
| Optic Edge Thickness(mm) | 4~20 |
| Angular Range(。) | ±3 |
| Clear Aperture(mm) | φ23 |
| Optical Axis Height(mm) | 25 |
| Resolution: angular adjustment per revolution(°) | ≈0.31 |
| Main Body Material and Surface Treatment | Black Anodized Aluminium Alloy |
| Thickness of Fixed Plate(mm) | 10 |
| Number of Pulling Spring | 4 |
| Mounting Hole | M6, φ8 counter bore |
| Net Weight(g) | 75 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Cavity and interferometer alignment
Hold pointing where a few microradians of drift is visible directly in the measurement.
Repeatable optic exchange
Kinematic seating returns an optic to the same orientation after it has been removed.
System integration
Integration and compatibility
Use these checks to connect NMC25.4 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optic it accepts
- Optic Size(mm): φ25/φ25.4 · Optic Edge Thickness(mm): 4~20
- Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
- Mounting interface
- Mounting Hole: M6, φ8 counter bore
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Adjustment
- Resolution: angular adjustment per revolution(°): ≈0.31
- Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
- Material and finish
- Main Body Material and Surface Treatment: Black Anodized Aluminium Alloy
- Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
- Dimensions and mass
- Net Weight(g): 75
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for NMC25.4
Which optics fit the NMC25.4?
Optic Size(mm): φ25/φ25.4 · Optic Edge Thickness(mm): 4~20. Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
How does the NMC25.4 mount?
Mounting Hole: M6, φ8 counter bore. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What adjustment range does the NMC25.4 offer?
Resolution: angular adjustment per revolution(°): ≈0.31. Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
What is the NMC25.4 made from?
Main Body Material and Surface Treatment: Black Anodized Aluminium Alloy. Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
What are the dimensions of the NMC25.4?
Net Weight(g): 75. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare NMC25.4 with the closest available models in the NMC Series Center Kinematic Mirror Mounts family. Confirm option-dependent values on the final configuration before ordering.
