Beam steering
Two-axis angular adjustment for directing a beam between components on the table.
Kinematic Mirror Mount · NMHS series Kinematic Mirror Mount
NMHS30
NMHS series Kinematic Mirror Mount
High-quality materials: The main body is made of high-quality aluminium-alloy, and the surface treated by black anodic oxidation.
Datasheet (PDF) ↗CAD Model (RAR) ↗Catalog context
Where NMHS30 fits
NMHS30 is listed as NMHS series Kinematic Mirror Mount in the NMHS series Kinematic Mirror Mount family. The local catalog record provides these first selection fields: Optic Size (mm): φ30; Optic Edge Thickness (mm): 3~6; Angular Range (°): ±3.
Specifications
| Optic Size (mm) | φ30 |
|---|---|
| Optic Edge Thickness (mm) | 3~6 |
| Angular Range (°) | ±3 |
| Clear Aperture (mm) | φ28 |
| Optical Axis Height(mm) | 25 |
| Resolution: angular adjustment per revolution (°) | ≈0.33 |
| Main Body Material and Surface Treatment | Aluminium alloy, surface treated by black anodic oxidation. |
| Thickness of The Fixed Plate(mm) | 10.5 |
| Number of Pulling Spring | 4 |
| With Locking Mechanics | Yes |
| Mounting Hole | M6, counter boreφ8 |
| Net Weight(g) | 85 |
Application context
Why this design is used
Application guidance is derived from the product family and tied to the model-specific selection fields above.
Cavity and interferometer alignment
Hold pointing where a few microradians of drift is visible directly in the measurement.
Repeatable optic exchange
Kinematic seating returns an optic to the same orientation after it has been removed.
System integration
Integration and compatibility
Use these checks to connect NMHS30 to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optic it accepts
- Optic Size (mm): φ30 · Optic Edge Thickness (mm): 3~6
- Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
- Mounting interface
- Mounting Hole: M6, counter boreφ8
- Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
- Adjustment
- Resolution: angular adjustment per revolution (°): ≈0.33
- Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
- Material and finish
- Main Body Material and Surface Treatment: Aluminium alloy, surface treated by black anodic oxidation.
- Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
- Dimensions and mass
- Net Weight(g): 85
- Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Technical FAQ
Integration questions for NMHS30
Which optics fit the NMHS30?
Optic Size (mm): φ30 · Optic Edge Thickness (mm): 3~6. Check diameter and thickness together. A holder that accepts the diameter can still fail to retain an optic that is thinner than its minimum, and clear aperture is normally smaller than the optic the mount holds.
How does the NMHS30 mount?
Mounting Hole: M6, counter boreφ8. Match the thread standard and hole pitch before ordering. Metric and imperial hardware interchange only through an adapter, and a thread that is nominally similar is not necessarily the same pitch.
What adjustment range does the NMHS30 offer?
Resolution: angular adjustment per revolution (°): ≈0.33. Adjuster pitch sets the sensitivity you can actually work at. Confirm whether the stated figure is a total range or a per-revolution increment, and whether the mechanism is locked after adjustment.
What is the NMHS30 made from?
Main Body Material and Surface Treatment: Aluminium alloy, surface treated by black anodic oxidation.. Aluminium moves about 23 ppm per kelvin and stainless about 16. In a path where thermal drift is already budgeted, the material of the mount belongs in that budget rather than in the appearance of the part.
What are the dimensions of the NMHS30?
Net Weight(g): 85. Use the stated geometry and mass to fix beam height, clearance and the load carried by whatever this part is bolted to. These are the numbers that decide whether adjacent components physically collide.
Model selection
Nearby series comparison
Compare NMHS30 with the closest available models in the NMHS series Kinematic Mirror Mount family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | NMHS30 (current) | NMHS25.4 | NMHS38.1 |
|---|---|---|---|
| Optic accepted | φ30 | φ25/φ25.4 | φ38.1 |
| Adjustment | ±3 | ±3 | ±3 |
| Mounting interface | M6, counter boreφ8 | M6, counter boreφ8 | M6, counter boreφ8 |
| Material | Aluminium alloy, surface treated by black anodic oxidation. | Aluminium alloy, surface treated by black anodic oxidation. | Aluminium alloy, surface treated by black anodic oxidation. |
