WDM Components
WDM Filter 1×2, PM
The 100/200GHz PM Wavelength Division Multiplexer (WDM) utilizes thin film coating technology and our proprietary design of non-flux metal bonding micro-optics packaging to achieve optical add and drop at the ITU wavelength. It provides ITU channel center wavelength, low insertion loss, high channel isolation, high extinction ratio, wide pass band, low temperature sensitivity, and an epoxy-free optical path. It can be used for wavelength add/drop in a telecommunication network system.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare WDM Filter 1×2, PM with the closest available models in the WDM Components family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | WDM Filter 1×2, PM (current) | SWDM / CWDM 850-1610nm | WDM Filter 100/200GHz, 1×2 |
|---|---|---|---|
| Wavelength range | Confirm for this model | 1270 nm, 1290 nm, 1310 nm, 1330 nm | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | SM28, 50/125, PM1310, PM1550, F | Confirm for this model |
| Connector / control | Confirm for this model | None, FC/APC, FC/PC, SC/APC, SC/PC, ST, LC/UPC, LC/APC | Confirm for this model |
