WDM MUX/DEMUX AWG Modules

48 Channels C21-C60, 100GHz, Flat Top or Gaussian, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber WDM Mux Demux, 1U

Our Wavelength Division Multiplexer (WDM) is based on Arrayed Waveguide Grating (AWG) technology. Compared to thin-film filter solutions, this proven approach offers lower insertion loss, higher fiber port counts, optimized spectral profiles, flexible channel configurations, and high channel isolation. This WDM series consists of passive optical multiplexer/demultiplexer modules designed for metro access applications, representing state-of-the-art fiber optic design. The Mux/Demux module supports multiple DWDM wavelengths with 100 GHz channel spacing, enabling efficient multiplexing and demultiplexing in ring or point-to-point network architectures, making it ideal for telecommunications and data networking.

Configure & add to enquiry Datasheet (PDF)Back to WDM MUX/DEMUX AWG Modules

48 Channels C21-C60, 100GHz, Flat Top or Gaussian, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber WDM Mux Demux, 1U

Configuration options

Build & quote

Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.

Ch. SpacingNumber of ChannelsType1st ITU Channel Number * (for example)ConfigurationOTDR PortConnector

Part number: AAWG-148121118

Ch. Spacing: 100G · Number of Channels: 48 · Type: Flat top · 1st ITU Channel Number * (for example): 1560.61nm · Configuration: MUX or DEMUX · OTDR Port: Non · Connector: LC/UPC

Downloads

Datasheets & documents

AAWG

System integration

Integration and compatibility

Use these checks to connect 48 Channels C21-C60, 100GHz, Flat Top or Gaussian, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber WDM Mux Demux, 1U to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.

Optical interface and fiber: Connector: LC/UPC, Special; Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

Technical FAQ

Integration questions for 48 Channels C21-C60, 100GHz, Flat Top or Gaussian, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber WDM Mux Demux, 1U

Which fiber and connector does the 48 Channels C21-C60, 100GHz, Flat Top or Gaussian, with Monitor Port, 3.0dB Typical IL, LC/UPC, Dual Fiber WDM Mux Demux, 1U use?

Connector: LC/UPC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.

Need this configured?

Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.

Configure & add to enquiry