Fiber Optical Sensor
Photonic Electric Field Sensing System (PEFS) is an instrument that optically measures the electric field. It integrates a fiber optic E-field sensor probe, a laser, a photo-receiver, an amplifier module, and associated electronics. The probe connects to the system via two fibers. The sensor system covers a broad frequency range from 10 MHz to 40 GHz. The E-field intensity is proportional to the readout signal. The amplifier gains are adjustable to optimize the sensitivity and the dynamic ranges. The E-field frequency information can be obtained by connecting to a spectrum analyzer or a frequency-tunable filter. A multichannel system is available with the configurations of either switching among the sensor heads or simultaneously reading all heads at once using independent laser and detector sets.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Frequency: 7GHz · Config: Standard · Package: 2RU · Fiber Type: MMF 50/125 · Channel: 1 · Redout: Simultaneous · Optical Connector: FC/APC
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Fiber Optical Electric-Field Readout System: Laboratory optical integration depends on preserving the optical budget through the complete path.. The fiber/interface entry (MMF 50/125, SMF 9/125) must match the connected components.
Fiber Optical Electric-Field Readout System: Fiber-optic instrumentation depends on preserving the optical budget through the complete path.. The fiber/interface entry (MMF 50/125, SMF 9/125) must match the connected components.
System integration
Use these checks to connect Fiber Optical Electric-Field Readout System to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Fiber Type: MMF 50/125, SMF 9/125 · Optical Connector: FC/APC. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Fiber Optical Electric-Field Readout System with the closest available models in the Fiber Optical Sensor family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Fiber Optical Electric-Field Readout System (current) | Fiber Optical Electric Field Sensor Head | Multichannel Fiber Optical Temperature Sensor Readout Module |
|---|---|---|---|
| Wavelength range | Confirm for this model | Confirm for this model | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | MMF 50/125, SMF 9/125 | Panda PM | Confirm for this model |
| Connector / control | FC/APC | FC/APC | USB, RS232/Modbus® RTU, Ethernet/EtherCat |
