Optical Switches
MEMS Multi-Mode 1×2, 2×2 Fiber Optical Switch
MEDU, MEQU, MEPM The et MEMS™ Series Fiber Optical Switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using our proprietary thermal activated micro-mirror, moving in and out of optical paths, uniquely featuring an ultra-small size and rugged design. The MEMS Latching type with built-in driver switches can be directly mounted on a printed circuit board with configurations of 1×1, Dual 1×1, Quad 1×1, 1×2, Dual 1×2, Full 2×2, and Dual Full 2×2 for Single mode and Multimode. This advanced design offers unprecedented high stability and high reliability, as well as a low-cost advantage.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare MEMS Multi-Mode 1×2, 2×2 Fiber Optical Switch with the closest available models in the Optical Switches family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MEMS Multi-Mode 1×2, 2×2 Fiber Optical Switch (current) | MEMS Matrix Fiber Optical Switch – (NxM) | MEMS Octo Full 2x2 Multi-Mode Fiber Optical Switch |
|---|---|---|---|
| Wavelength range | Confirm for this model | Confirm for this model | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | Confirm for this model |
| Connector / control | Confirm for this model | Confirm for this model | Confirm for this model |
