Technology guide
MEMS optical switches: routing states and switching limits
Choose topology, port count and state behaviour before comparing optical loss or switching time.
- 01Electrical command
- 02MEMS motion
- 03Optical routing
- 04Selected ports
How it works
- A MEMS optical switch uses a microelectromechanical structure to change an optical routing state. Its actual mechanism and port arrangement are product-specific.
- A one-to-many selector, a matrix and a bypass switch provide different connection possibilities. Similar port counts do not imply equivalent simultaneous routes.
- Latching and non-latching operation describe behaviour when drive or power is removed. Confirm the documented default state and recovery sequence.
- Switching time includes the device's optical settling definition. It is not necessarily the same as the command input rise time.
What to compare
| Parameter | Check in the specification |
|---|---|
| Topology | Draw the required allowed connections and any simultaneous paths. |
| Optical budget | Include insertion loss, return loss, crosstalk and polarization dependence. |
| Timing | Keep command latency, transition interval and settled-state definition separate. |
| State control | Check drive voltage, electrical interface and feedback or status outputs. |
Integration
- Match fiber type and connectors across every used port.
- For monitoring systems, plan what happens during a switching transition and power failure.
- Use the model's routing diagram rather than inferring paths from the connector panel.
Related products
References
Discuss the configuration. Send the wavelength, optical levels, port topology and fiber interfaces.