Optical Switches
MEMS 1×1, 1×2, 2×2, Dual 2×2, Quad 1×1 Fiber Optical Switch
MEDU, MEQU, MEPM The et MEMSTM Series Fiber Optical Switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using our proprietary thermal activated micro-mirror, moving in and out of optical paths, uniquely featuring ultra small size and ruggedness. The MEMS Latching type with Built-in driver switches can be directly mounted on a printed circuit board with configurations of 1×1, Dual 1×1, Quad 1×1, 1×2, Dual 1×2, Full 2×2, and Dual Full 2×2 for Single mode and Multimode. This advanced design offers unprecedented high stability and high reliability as well as a low-cost advantage.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare MEMS 1×1, 1×2, 2×2, Dual 2×2, Quad 1×1 Fiber Optical Switch with the closest available models in the Optical Switches family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | MEMS 1×1, 1×2, 2×2, Dual 2×2, Quad 1×1 Fiber Optical Switch (current) | Line Protection Switch Module | MEMS 1x12 Fiber Optical Switch/VOA |
|---|---|---|---|
| Wavelength range | Confirm for this model | Confirm for this model | Confirm for this model |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | Confirm for this model |
| Connector / control | Confirm for this model | Confirm for this model | Confirm for this model |
