Optical Modulators
This is a high performance, 20 GHz phase modulator. It can provide phase modulation in a broad operation bandwidth with a low driving voltage. Its low insertion loss and high optical power handling capability provides for maximum transmission power. It is fabricated with Annealed Proton Exchange (APE) optical waveguides on X-cut LiNbO3 material, and uses polarization maintaining input and output fibers, making it easy to integrate with other optical components. Note: This component is intended for OEM system integration and is not designed for standalone laboratory use. Units supplied without a protective benchtop enclosure are provided without warranty, as they are susceptible to damage from improper handling, installation, or operation.
Configuration options
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
Part number: LNPM-211399113
Configuration: Phase · Wavelength: 1060nm · Frequency: 20GHz · Input Fiber: PM980 · Output Fiber: PM980 · Cable: 0.9mm Tube · Fiber Length: 0.5m · Connector: FC/APC
Application context
Application guidance is tied to the configured wavelength, fiber interface and optical-budget fields for this family.
Fiber Optical Phase Modulator 1060nm - 20GHz: Optical modulation depends on preserving the optical budget through the complete path. The 1060nm wavelength specification sets source and detector compatibility. The fiber/interface entry (PM980) must match the connected components. The 20GHz dynamic specification sets the usable control bandwidth.
Fiber Optical Phase Modulator 1060nm - 20GHz: Time-resolved measurement depends on preserving the optical budget through the complete path. The 1060nm wavelength specification sets source and detector compatibility. The fiber/interface entry (PM980) must match the connected components. The 20GHz dynamic specification sets the usable control bandwidth.
Downloads
System integration
Use these checks to connect Fiber Optical Phase Modulator 1060nm - 20GHz to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
Technical FAQ
Input Fiber: PM980 · Output Fiber: PM980. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
Wavelength: 1060nm. Check the Optical Modulators passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Compare Fiber Optical Phase Modulator 1060nm - 20GHz with the closest available models in the Optical Modulators family. Confirm option-dependent values on the final configuration before ordering.
| Selection parameter | Fiber Optical Phase Modulator 1060nm - 20GHz (current) | Fiber Optical DP-QPSK (I-Q) Modulator 128Gbps | Fiber Optical Phase Modulator 1060nm – 200MHz |
|---|---|---|---|
| Wavelength range | 1060nm | 1550 nm | 1060nm |
| Optical performance | Confirm for this model | Confirm for this model | Confirm for this model |
| Fiber type | Confirm for this model | Confirm for this model | Confirm for this model |
| Connector / control | FC/APC, FC/PC, Special | Non, Yes | FC/APC, FC/PC, Special |
DC-1MHz Driver for NanoSpeed™ Variable Optic AttenuatorDC-100kHz Driver for NanoSpeed™ Variable Optic Attenuator
DC-20kHz Driver for NanoSpeed™ Variable Optic Attenuator
High Speed Variable Fiber Optical Attenuator Array (up to 48 Channels)
High Speed Broadband Variable Optical Attenuator 950-2400nm, 120nm CoverageHigh Speed Premium Broadband Variable Optical Attenuator 350-2400nm, 120nm Coverage