Transmitters & Receivers
12GHz Fiber Optical Amplified Photodetector / Photoreceiver
The PP-10G module consists of a low capacitance photodetector and a low noise GaAs transimpedance amplifier in a hermetic package with a connectorized single-mode fiber pigtail and a 50 Ω SMA electrical output. HBT is a linear amplifier. Due to their high sensitivity to electrostatic discharge, warranty coverage applies only to fully metal covered modules the benchtops, which include proper protection. Other versions of the lasers and photodetectors are not covered by any warranty. Please use them with great caution.
Configuration options
Build & quote
Configure the options below and add your exact build to the enquiry — we confirm the part number and availability.
We confirm the exact part number for your configuration on enquiry.
Detector Type: PIN · Wavelength Range: 1200-1600nm · Bandwidth: 12GHz · Amplification: Single Stage · Module: Non · Configuration: Standard · Connector: FC/PC
System integration
Integration and compatibility
Use these checks to connect 12GHz Fiber Optical Amplified Photodetector / Photoreceiver to the surrounding optical, mechanical and control system. Every value shown is taken from this model's own specification record.
- Optical interface and fiber
- Connector: FC/PC, FC/APC, Special
- Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
- Wavelength and loss budget
- Wavelength Range: 1200-1600nm
- Check the Transmitters & Receivers passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Technical FAQ
Integration questions for 12GHz Fiber Optical Amplified Photodetector / Photoreceiver
Which fiber and connector does the 12GHz Fiber Optical Amplified Photodetector / Photoreceiver use?
Connector: FC/PC, FC/APC, Special. Specify connector polish and fiber architecture together. FC/PC, FC/APC and SMA interfaces, and single-mode, multimode and polarization-maintaining fibers, impose different return-loss, mode-field and alignment requirements.
How should the 12GHz Fiber Optical Amplified Photodetector / Photoreceiver be included in an optical power budget?
Wavelength Range: 1200-1600nm. Check the Transmitters & Receivers passband, insertion loss, return loss and power handling at the actual source wavelength; a nominal telecom-band label is not a substitute for the configured range.
Need this configured?
Share your wavelength, fiber type, connector, power handling and control requirements and we will qualify the matching configuration and part number.
Model selection
Nearby series comparison
Compare 12GHz Fiber Optical Amplified Photodetector / Photoreceiver with the closest available models in the Transmitters & Receivers family.
| Selection parameter | 12GHz Fiber Optical Amplified Photodetector / Photoreceiver (current) | 12, 25 GHz Fiber Optical Amplified InGaAs PIN Photodiode | 1310/1550nm 10GHz Transceiver without TIA |
|---|---|---|---|
| Wavelength range | 1200-1600nm | 1230 - 1620 | 1310nm, 1550nm, 1490nm |
| Connector / control | FC/PC, FC/APC, Special | None, FC/APC, Special | None, FC/APC, Special |
