Zolix · Motorized Stages
TMC-NET-1-S257 Motion Controller
1-axis TMC-NET motion controller with Ethernet network connectivity for multi-axis coordinated positioning. Equipped with built-in drive channels for a 2-phase 57 stepper motor, LabVIEW-based control software, and hardware support for 2- to 3-axis linear interpolation, 2-axis circular interpolation, and continuous motion. Includes optocoupler-isolated limit and origin sensor inputs, encoder feedback, and secondary development libraries for automated test and production environments.
- Controlled axes
- 1 axis
- Compatible motor type
- 2-phase 57 stepper motor
- Host communication interface
- Ethernet (RJ45, TCP/IP network)
- Control software
- LabVIEW-based control software; secondary development SDK supported
Specifications
| Controlled axes | 1 axis |
|---|---|
| Compatible motor type | 2-phase 57 stepper motor |
| Host communication interface | Ethernet (RJ45, TCP/IP network) |
| Control software | LabVIEW-based control software; secondary development SDK supported |
| Interpolation functions | Linear interpolation (2–3 axes), circular interpolation (2 axes), continuous interpolation |
| Max pulse output frequency | 4 MHz |
| Pulse output frequency error | < 0.1% |
| Acceleration / deceleration | Linear |
| Positioning counter digits | 32-bit logic counter |
| Real-time parameters | Logic position, real position, driving speed, acceleration |
| Position sensor inputs | Dedicated optocoupler inputs for independent left/right limits and origin sensor per axis |
| Encoder inputs | Pulsed optocoupler inputs for A- and B-phase encoder feedback |
| General digital I/O | Up to 8-channel optocoupler inputs and 8-channel open-collector outputs per axis |
| Power supply | 220 V AC ±10%, 45–65 Hz |
| Power consumption | < 1 kW |
| Operating temperature range | 0°C ~ +50°C |
| Storage temperature range | -20°C ~ +80°C |
| Operating humidity range | 20% ~ 95% (non-condensing) |