Spectroscopy Detectors · Near- and mid-infrared single-point detectors
DInGaAs1700-TE / DInGaAs2600-TE
DInGaAs TE-Cooled InGaAs Detectors
- Models: DInGaAs1700-TE / DInGaAs2600-TE
- Spectral range: 800–1700 nm / 800–2600 nm
- Peak responsivity: 0.9 A/W / 1.2 A/W
- Cooling: Thermoelectric (TE)
- Operating temperature: −40 °C
- Temperature stability: ±0.5 °C
Cataloguscontext
De plaats van DInGaAs1700-TE / DInGaAs2600-TE in het assortiment
DInGaAs1700-TE / DInGaAs2600-TE staat als DInGaAs TE-Cooled InGaAs Detectors vermeld binnen de familie Near- and mid-infrared single-point detectors. Het lokale catalogusrecord bevat als eerste selectievelden: Models: DInGaAs1700-TE / DInGaAs2600-TE; Spectral range: 800–1700 nm / 800–2600 nm; Peak responsivity: 0.9 A/W / 1.2 A/W.
Specifications
| Models | DInGaAs1700-TE / DInGaAs2600-TE |
|---|---|
| Spectral range | 800–1700 nm / 800–2600 nm |
| Peak responsivity | 0.9 A/W / 1.2 A/W |
| Cooling | Thermoelectric (TE) |
| Operating temperature | −40 °C |
| Temperature stability | ±0.5 °C |
| Temperature controller | ZTC |
| Source naming note | The parent category card says DInAs; the detailed product body, hardware label, response curve and table identify DInGaAs/InGaAs |
Volledige bronspecificatie
Vergelijking per model
De volledige vergelijking van de fabrikant staat hieronder, zodat modelverschillen zichtbaar blijven en niet tot één bereik worden teruggebracht.
The manufacturer parent-card title says DInAs, while the product body, response curve, hardware label and specification table consistently identify TE-cooled InGaAs models. The detailed model designation is used here.
| Parameter | DInGaAs1700-TE | DInGaAs2600-TE |
|---|---|---|
| Effective-area diameter | 3 mm | 3 mm |
| Spectral range | 800–1700 nm | 800–2600 nm |
| Peak responsivity | 0.9 A/W | 1.2 A/W |
| D*, typical | 8.4 × 10¹³ | 4.9 × 10¹¹ |
| NEP, typical | 3.2 × 10⁻¹⁵ | 5.5 × 10⁻¹³ |
| Operating temperature | −40 °C | −40 °C |
| Temperature stability | ±0.5 °C | ±0.5 °C |
| Ambient temperature | +10 to +40 °C | +10 to +40 °C |
| Signal output | Current | Current |
| Output polarity | P | P |
| Temperature controller | ZTC | ZTC |
Ontwerp- en integratiedetails
- Two-stage TE-cooled InGaAs detectors covering 0.8–2.6 µm.
- Both variants use the same detector-head construction.
- ZTC temperature controller is required for cooled operation.
- ZAMP transimpedance amplifier is recommended for current-to-voltage conversion and improved sensitivity.
Toepassings- en aansluitnotities
- The detailed source content identifies these models as DInGaAs1700-TE and DInGaAs2600-TE; the parent category card incorrectly labels the family DInAs.
- DCS300PA integrates a signal amplifier; an extra preamplifier is generally unnecessary with that acquisition system.
Waarden zijn overgenomen uit de gearchiveerde producttabel en tekeningen. Bevestig de uiteindelijke detector, elektronica en spectrograafaansluiting voor uw configuratie.



