Back to Home
Mirrors.Z12

Opto-Mechanics · Ambient Piezo Stages - Fast steering mirrors

Mirrors.Z12

Fast steering piston mirror module; Z-axis mirror motion; 12 um closed-loop travel; about 4 kHz resonant frequency; use for beam steering, phase tuning, or fast axial correction; .HV, .UHV, and .NM variants available.

View quote list
Datasheet (PDF) ↗

Specifications

Active axesZ
Mass40 g
Travel range(open-loop)15 μm
Travel range(closed-loop)12 μm
Resolution(closed-loop)0.2 nm
Linearity0.001
Stiffness40 N/um
Resonant Frequency(no load)4 kHz
Max. Payload (horizontal mounting)200 g
Sensor TypeSGS
Max Driving Voltage150 V
CableD-Sub 3W3
ControllerMC-Archimedes.N series

Toepassingen

Closed-loop bundelstabilisatie

Corrigeer richtingsdrift en laagfrequente jitter voordat die het monster of de detector bereikt.

Optisch scannen en dithering

Stuur een bundel over een veld of moduleer zijn positie sneller dan een tafel het monster kan bewegen.

Uitlijning van vrijeruimteverbindingen

Houd een verzonden bundel op een verre apertuur terwijl houder en gebouw bewegen.

Specifying this part

What this model has to survive, and what it needs around it

Strain gauges, because bandwidth beats linearity here

These use SGS sensors rather than capacitive, trading ultimate linearity for the millisecond response beam stabilisation needs. Closed-loop range is ±1.5 mrad on the 0303 and ±5 mrad on the 1010, with 0.1 to 0.5 µrad closed-loop resolution.

Vacuum and non-magnetic versions

Most of the range is orderable as .HV (high vacuum), .UHV (ultra-high vacuum) or .NM (non-magnetic). The suffix changes materials, cabling and bake compatibility rather than the mechanics, so specify it against the chamber the stage will live in.

Full series comparison, controller pairing and mounting hardware on the ambient piezo stages overview, or work through the selection with the configurator.