Back to Home
Carrier.SL200.XY.C

Opto-Mechanics · Ambient Piezo Stages - Carrier scanner stages

Carrier.SL200.XY.C

Low-profile clear-aperture scanner; 200 x 200 um XY travel; 77 x 65 mm aperture; 14 mm height; 500 g payload; capacitive closed-loop feedback.

View quote list
Datasheet (PDF) ↗

Specifications

Active axesX, Y
Travel range200 X 200 μm
Aperture77 × 65 mm
Resolution2 nm
Repeatability10 nm
Linearity0.0003
Max. Payload (horizontal mounting)500 g
Sensor TypeCapacitive Sensor
Max Driving Voltage150 V
CombinationIts mounting hole is compatible with Carrier.L7550.XY
ControllerMC-Archimedes.N series

Toepassingen

Gecombineerde grove slag en fijnscan

Bereik een interessegebied over millimeters en scan het daarna met nanometerstappen op hetzelfde lichaam.

Meerassige monstermanipulatie

Stuur XY-, XYZ-, tip/tilt- of Rz-combinaties vanuit één geïntegreerde tafel.

Werk in transmissie met vrije apertuur

Varianten met open centrum laten de bundel door de tafel voor transmissie- en omgekeerde geometrieën.

Specifying this part

What this model has to survive, and what it needs around it

Multi-axis in one body

XY, XYZ, ZTxTy, XYRz and full six-axis variants built as one flexure assembly rather than a stack, which keeps the error budget and the height down. High-load and clear-aperture versions are available in the same family.

Vacuum and non-magnetic versions

Most of the range is orderable as .HV (high vacuum), .UHV (ultra-high vacuum) or .NM (non-magnetic). The suffix changes materials, cabling and bake compatibility rather than the mechanics, so specify it against the chamber the stage will live in.

Full series comparison, controller pairing and mounting hardware on the ambient piezo stages overview, or work through the selection with the configurator.