Fiber output, PM options, seed formats
MPL-FL-355355 nm UV fiber laser
355 nmMPL-FL-355 is a 355 nm Fiber laser. Used for scientific research, biology, instrumentation, laser marking. Key specifications: output / average power 1~1000 mW, pulse energy 1~50 uJ, repetition rate ~20 kHz. View specifications, datasheet and enquiry options from Precisometer.
Specifications
MPL-FL-355
21 specification rows
| Output / average power | 1~1000 mW |
|---|---|
| Pulse energy | 1~50 uJ |
| Repetition rate | ~20 kHz |
| Pulse width | ~5 ns |
| Central wavelength (nm) | 355±1 |
| Operating mode | Passively Q-switched |
| Average power (mW) | Average power (mW) = Single pulse energy (µJ) * Rep. rate (kHz) |
| QCW | QCW state with one rep. rate ~20kHz. |
| Single pulse energy (µJ) | 1-50 |
| Pulse duration (ns) | ~5 |
| Peak power (kW) | ~10 |
| Power stability (rms, 4 hours ± 3°C) | <3%, <2%,<1% |
| Transverse mode | TEM00 |
| Beam divergence, full angle (mrad) | <1.0 |
| Beam diameter at the aperture (1/e2, mm) | ~3.0 |
| Polarization ratio | >100:1 Vertical |
| Beam height from base plate (mm) | 32 |
| Warm-up time (minutes) | <10 |
| Operating temperature (℃) | 10-35 |
| Power supply (100-240VAC) | PSU-N-LED |
| Expected lifetime (hours) | >10000 |
Applications
Uses named on this model’s datasheet.
- Scientific research
- Biology
- Instrumentation
- Laser marking
- Sub-surface engraving
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the MPL-FL-355 with nearby fiber lasers across the wavelength range.
