Fiber output, PM options, seed formats
FL-LN-FA(1014-1120)1014 nm near-infrared low-noise fiber laser
1014 nmFL-LN-FA(1014-1120) is a 1014 nm Fiber laser. Used for industrial material processing, ultrafast laser amplification, laser radar. Fiber laser. Key specifications: output / average power 1~10 W, operating mode CW, power stability (rms, 4 hours, ±3℃) <2%, <1%, <0.5%. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-LN-FA(1014-1120)
21 specification rows
| Output / average power | 1~10 W |
|---|---|
| Beam / notes | Fiber laser |
| Operating mode | CW |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1%, <0.5% |
| Excess relative intensity noise (rms, 10Hz-3MHz) | <0.03% |
| Fiber connector | FC/APC, Collimator optional |
| laser radar, etc. Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Beam diameter (mm) | 4±1 (Collimator output) |
| Polarization ratio (dB) | >15, after PM fiber |
| Cooled method | Air cooled (≤30W) or Water cooled (≤50W) |
| Operating temperature (℃) | 15-30 |
| Power supply (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
| Typical wavelength (nm) | 1018, 1030, 1064 |
| Power turning range | 1~100% |
| Transverse mode | TEM00 |
| Fiber length(m) | 1 |
| Seed laser input power (mW) | ≥10, Single mode PM fiber, FC/APC |
| Seed laser input isolation (dB) | >20 |
| Output laser isolation (dB) | >20 |
Applications
Uses named on this model’s datasheet.
- Industrial material processing
- Ultrafast laser amplification
- Laser radar
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-LN-FA(1014-1120) with nearby fiber lasers across the wavelength range.
