Fiber output, PM options, seed formats
FL-618-SLM618 nm orange single-frequency low-noise fiber laser
618 nmFL-618-SLM is a 618 nm Fiber laser. Used for scientific research, collimation, laser medical treatment, scientific experiments. Laser. Key specifications: output / average power 1-50 mW, operating mode CW, free space output power (mw) 1-50. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-618-SLM
28 specification rows
| Output / average power | 1-50 mW |
|---|---|
| Beam / notes | Laser |
| Operating mode | CW |
| Free space output power (mW) | 1-50 |
| Fiber coupled output power (mW) | 1-25 |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
| M2 | <1.1 |
| Fiber connector | FC/APC |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Polarization ratio (dB) | >15 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VAC) | 110/220V |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 618±1 |
| Temperature turning range (nm) | >0.2 |
| PZT Turning range (GHz) | >5 |
| PZT Turning bandwidth (kHz) | >5 |
| M² | <1.1 |
| Numerical aperture | 0.12NA |
| Beam diameter (mm) | ~1@free space output |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Collimation
- Laser medical treatment
- Scientific experiments
- Optical lattices
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-618-SLM with nearby fiber lasers across the wavelength range.
