Fiber output, PM options, seed formats
FL-532-SLM-E532 nm green narrow-linewidth single-frequency fiber laser
532 nmFL-532-SLM-E is a 532 nm Fiber laser. Used for scientific research, optical lattices, atomic cooling, laser drilling. M²: <1.2. Key specifications: output / average power 20-40 W, spectral linewidth <50 kHz, optical noise <0.1% RIN(DC-3 MHz). View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-532-SLM-E
23 specification rows
| Output / average power | 20-40 W |
|---|---|
| Spectral linewidth | <50 kHz |
| Optical noise | <0.1% RIN(DC-3 MHz) |
| M² | <1.2 |
| Operating mode | CW |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1%, <0.5% |
| Beam diameter (mm) | ~1.6 |
| Beam divergence, full angle (mrad) | <1 |
| Pointing stability (urad) | <15 / <50 |
| Polarization ratio | Vertical, >100:1 |
| Warm-up time of warm boot(minutes) | <30 |
| Warm-up time of cold boot(hours) | <2 |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VAC) | 110/220VAC |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 532±1 |
| Output power (W) | 20-40 |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.5%, <0.3%, <0.1% |
| Beam ellipticity | >90% |
| Beam height from base plate (mm) | 45 |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Optical lattices
- Atomic cooling
- Laser drilling
- Glass engraving
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-532-SLM-E with nearby fiber lasers across the wavelength range.
