Fiber output, PM options, seed formats
FL-532-SLM532 nm green narrow-linewidth single-frequency fiber laser
532 nmFL-532-SLM is a 532 nm Fiber laser. Used for scientific research, optical lattices, atomic cooling, laser drilling. M²: <1.1. Key specifications: output / average power 1~3000 mW, spectral linewidth <20 kHz, optical noise <0.05% RIN(DC-3 MHz). View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-532-SLM
22 specification rows
| Output / average power | 1~3000 mW |
|---|---|
| Spectral linewidth | <20 kHz |
| Optical noise | <0.05% RIN(DC-3 MHz) |
| M² | <1.1 |
| Operating mode | CW |
| Free space output power (W) | 3-10 / 10-15 |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1%, <0.5% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| M2 | <1.1 / <1.2 |
| Beam diameter (mm) | ~0.8 |
| Pointing stability (urad) | <15 / <50 |
| Polarization ratio (dB) | >20 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <30 |
| Cooled method | Water cooled |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VAC) | 110/220V |
| Expected lifetime (hours) | >10000 |
| Fundamental Frequency | Second harmonic / WATER CHILLER (WCH-580) |
| Wavelength (nm) | 532±1 |
| Frequency shift (MHz) (over ±2℃and 8 hours) | <±200 |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Optical lattices
- Atomic cooling
- Laser drilling
- Glass engraving
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-532-SLM with nearby fiber lasers across the wavelength range.
