Fiber output, PM options, seed formats
FL-520-SLM520 nm green single-frequency low-noise fiber laser
520 nmFL-520-SLM is a 520 nm Fiber laser. Used for scientific research, optical lattices, atomic cooling, laser drilling. Fiber laser. Key specifications: output / average power 1~2000 mW, operating mode CW, free space output power (mw) 1-2000. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-520-SLM
26 specification rows
| Wavelength | 520 nm |
|---|---|
| Output / average power | 1~2000 mW |
| Beam / notes | Fiber laser |
| Operating mode | CW |
| Free space output power (mW) | 1-2000 |
| Fiber coupled output power (mW) | 1-500 |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Frequency shift (MHz) (over ±2℃and 8hours ) | <±200 |
| M2 | <1.1 |
| Fiber connector | FC/APC |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Polarization ratio (dB) | >15 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VAC) | 110/220V |
| Expected lifetime (hours) | >10000 |
| Temperature turning range(nm) | >0.2 |
| PZT Turning range (GHz) | >5 |
| PZT Turning bandwidth (kHz) | >5 |
| M² | <1.1 |
| Numerical aperture | 0.12NA |
| Beam diameter (mm) | ~1@free space output |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Optical lattices
- Atomic cooling
- Laser drilling
- Glass engraving
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-520-SLM with nearby fiber lasers across the wavelength range.
