Fiber output, PM options, seed formats
FL-515-SLM515 nm green narrow-linewidth single-frequency fiber laser
515 nmFL-515-SLM is a 515 nm Fiber laser. Used for scientific research, optical lattices, atomic cooling, laser drilling. M²: <1.1. Key specifications: output / average power 1~2000 mW, spectral linewidth <20 kHz, optical noise <0.05% RIN(DC-3 MHz). View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-515-SLM
27 specification rows
| Wavelength | 515 nm |
|---|---|
| Output / average power | 1~2000 mW |
| Spectral linewidth | <20 kHz |
| Optical noise | <0.05% RIN(DC-3 MHz) |
| M² | <1.1 |
| Operating mode | CW |
| Free space output power (mW) | 1-2000 |
| Fiber coupled output power (mW) | 1-500 |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Frequency shift (MHz) (over ±2℃and 8hours ) | <±200 |
| Fiber connector | FC/APC |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Polarization ratio (dB) | >15 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VAC) | 110/220V |
| Expected lifetime (hours) | >10000 |
| Beam / notes | Fiber laser |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.3%, <0.1%, (<0.05% optional) |
| Temperature turning range(nm) | >0.2 |
| PZT Turning range (GHz) | >5 |
| PZT Turning bandwidth (kHz) | >5 |
| Numerical aperture | 0.12NA |
| Beam diameter (mm) | ~1@free space output |
Applications
Typical uses for lasers of this wavelength and type in this catalogue.
- Scientific research
- Optical lattices
- Atomic cooling
- Laser drilling
- Glass engraving
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-515-SLM with nearby fiber lasers across the wavelength range.
