Fiber output, PM options, seed formats
FL-515-LN-L515 nm green single-frequency low-noise fiber laser
515 nmFL-515-LN-L is a 515 nm Fiber laser. Used for optical lattices, atomic cooling, scientific research. Fiber laser. Key specifications: output / average power 1~2000 mW, operating mode CW, free space output power (mw) 1-2000. View specifications, datasheet and enquiry options from Precisometer.
Specifications
FL-515-LN-L
26 specification rows
| Output / average power | 1~2000 mW |
|---|---|
| Beam / notes | Fiber laser |
| Operating mode | CW |
| Free space output power (mW) | 1-2000 |
| Fiber coupled output power (mW) | 1-500 |
| Power stability (rms, 4 hours, ±3℃) | <2%, <1% |
| Transverse mode | TEM00 |
| Longitudinal mode | SLM |
| Current adjustment range | 1-100% |
| Spectral linewidth (nm) | <0.002 |
| Relative intensity noise (rms, 10Hz-3MHz) | <0.1%, <0.05% |
| Frequency shift (MHz) (over ±2℃and 8hours ) | <±200 |
| M2 | <1.1 |
| Fiber connector | FC/APC |
| Fiber length(m) | 1 |
| Fiber jacket | PVC, Metal optional |
| Polarization ratio (dB) | >15 Horizontal (Vertical optional) |
| Warm-up time (minutes) | <30 |
| Cooled method | Air cooled or Water cooled |
| Operating temperature (℃) | 15-30 |
| Operating voltage (VAC) | 110/220V |
| Expected lifetime (hours) | >10000 |
| Wavelength (nm) | 515±1 |
| M² | <1.1 |
| Numerical aperture | 0.12NA |
| Beam diameter (mm) | ~1@free space output |
Applications
Uses named on this model’s datasheet.
- Optical lattices
- Atomic cooling
- Scientific research
Need this configured?
Share wavelength, operating mode, output power or pulse energy, linewidth or pulse width, delivery, control, and safety requirements and we will qualify the matching configuration and lead time.
Related fiber lasers
Compare the FL-515-LN-L with nearby fiber lasers across the wavelength range.
